Introduction

What's New in JCE in the Java 2 SDK, v 1.4

Cryptographic Concepts

Encryption and Decryption

Password-Based Encryption

Cipher

Key Agreement

Message Authentication Code

Core Classes

The Cipher Class

The Cipher Stream Classes

The CipherInputStream Class

The CipherOutputStream Class

The KeyGenerator Class

The SecretKeyFactory Class

The SealedObject Class

The KeyAgreement Class

The Mac Class

How to Make Applications "Exempt" from Cryptographic Restrictions

Installing JCE Providers for the Java 2 SDK, v 1.4

JCE Keystore

Code Examples

Using Encryption

Using Password-Based Encryption

Using Key Agreement

Appendix A: Standard Names

Appendix B: SunJCE Default Keysizes

Appendix C: SunJCE Keysize Restrictions

Appendix D: Jurisdiction Policy File Format

Appendix E: Maximum Key Sizes Allowed by "Strong" Jurisdiction Policy Files

Appendix F: Sample Programs

Diffie-Hellman Key Exchange between 2 Parties

Diffie-Hellman Key Exchange between 3 Parties

Blowfish Example

HMAC-MD5 Example

Introduction

This document is intended as a companion to the Java^TM Cryptography Architecture (JCA) API Specification & Reference. References to chapters not present in this document are to chapters in the JCA Specification.

The Java^TM Cryptography Extension (JCE) provides a framework and implementations for encryption, key generation and key agreement, and Message Authentication Code (MAC) algorithms. Support for encryption includes symmetric, asymmetric, block, and stream ciphers. The software also supports secure streams and sealed objects.

JCE was previously an optional package (extension) to the Java^TM 2 SDK, Standard Edition (Java 2 SDK), versions 1.2.x and 1.3.x. JCE has now been integrated into the Java 2 SDK, v 1.4.

JCE is based on the same design principles found elsewhere in the JCA: implementation independence and, whenever possible, algorithm independence. It uses the same "provider" architecture. Providers signed by a trusted entity can be plugged into the JCE framework, and new algorithms can be added seamlessly.

The JCE API covers:

• Symmetric bulk encryption, such as DES, RC2, and IDEA

• Symmetric stream encryption, such as RC4

• Asymmetric encryption, such as RSA

• Password-based encryption (PBE)

• Key Agreement

• Message Authentication Codes (MAC)

The Java 2 SDK, v 1.4 release comes standard with a JCE provider named "SunJCE", which comes pre-installed and registered and which supplies the following cryptographic services:

• An implementation of the DES (FIPS PUB 46-1), Triple DES, and Blowfish encryption algorithms in the Electronic Code Book (ECB), Cipher Block Chaining (CBC), Cipher Feedback (CFB), Output Feedback (OFB), and Propagating Cipher Block Chaining (PCBC) modes. (Note: Throughout this document, the terms "Triple DES" and "DES-EDE" will be used interchangeably.)

• Key generators for generating keys suitable for the DES, Triple DES, Blowfish, HMAC-MD5, and HMAC-SHA1 algorithms.

• An implementation of the MD5 with DES-CBC password-based encryption (PBE) algorithm defined in PKCS #5.

• "Secret-key factories" providing bi-directional conversions between opaque DES, Triple DES and PBE key objects and transparent representations of their underlying key material.

• An implementation of the Diffie-Hellman key agreement algorithm between two or more parties.

• A Diffie-Hellman key pair generator for generating a pair of public and private values suitable for the Diffie-Hellman algorithm.

• A Diffie-Hellman algorithm parameter generator.

• A Diffie-Hellman "key factory" providing bi-directional conversions between opaque Diffie-Hellman key objects and transparent representations of their underlying key material.

• Algorithm parameter managers for Diffie-Hellman, DES, Triple DES, Blowfish, and PBE parameters.

• An implementation of the HMAC-MD5 and HMAC-SHA1 keyed-hashing algorithms defined in RFC 2104.

• An implementation of the padding scheme described in PKCS #5.

• A keystore implementation for the proprietary keystore type named "JCEKS".

A Note on Terminology

The JCE within the Java 2 SDK, v 1.4 includes two software components:

• the framework that defines and supports cryptographic services that providers can supply implementations for. This framework includes everything in the javax.crypto package.

• a provider named "SunJCE"

Throughout this document, the term "JCE" by itself refers to the JCE framework in the Java 2 SDK, v 1.4. Whenever the JCE provider supplied with the Java 2 SDK, v 1.4 is mentioned, it will be referred to explicitly as the "SunJCE" provider.

What's New in JCE in the Java 2 SDK, v 1.4

Here are the differences between JCE 1.2.1 and the JCE within the Java 2 SDK, v 1.4:

• JCE Is Now in Java 2 SDK

• Strong Cryptography Is the Default, Unlimited Is Available

• Provider Authentication of JCE Framework No Longer Required

• Support for Additional Features of PKCS #1, #5 and #8

• SunJCE Default Blowfish Keysize Has Changed

JCE Is Now in Java 2 SDK

JCE was previously an optional package (extension) to the Java^TM 2 SDK, Standard Edition (Java 2 SDK), versions 1.2.x and 1.3.x. JCE has now been integrated into the Java 2 SDK, v 1.4. The SunJCE provider is also included and is automatically registered in the java.security security properties file included with the Java 2 SDK, v 1.4.

Strong Cryptography Is the Default, Unlimited Is Available

Due to import control restrictions, the jurisdiction policy files shipped with the Java 2 SDK, v 1.4 allow "strong" but limited cryptography to be used. An "unlimited strength" version of these files indicating no restrictions on cryptographic strengths is available for those living in eligible countries (which is most countries). You can download this version and replace the strong cryptography versions supplied with the Java 2 SDK, v 1.4 with the unlimited ones. See

http://java.sun.com/products/jce/index-14.html

for information indicating where to go to download the unlimited version.

The jurisdiction policy files have been relocated to

<java-home>\lib\security         [Windows]
<java-home>/lib/security         [Solaris]

where <java-home> refers to the directory where the runtime software is installed, which is the top-level directory of the Java^TM 2 Runtime Environment (JRE) or the jre directory in the Java^TM 2 SDK (Java 2 SDK) software. They have been moved to this standard location so that it is easy to replace the strong cryptography versions that come with the Java 2 SDK, v 1.4 with the unlimited ones.

Provider Authentication of JCE Framework No Longer Required

In JCE 1.2.1, providers needed to include code to authenticate the JCE framework to assure themselves of the integrity and authenticity of the JCE that they plugged into. Now that JCE is integrated into the Java 2 SDK, v 1.4, this is no longer necessary.

JCE 1.2.1 providers which follow the guidance in How to Implement a Provider for the Java Cryptography Extension 1.2.1 will continue to work with the JCE framework in the Java 2 SDK, v 1.4.

However, a provider whose framework authentication code locates the JCE framework via protection domain instead of following the recommendations in the aforementioned JCE 1.2.1 JCE provider document will not work in the Java 2 SDK, v 1.4. Now that JCE has been integrated into the Java 2 SDK, v 1.4, the JCE framework has a null code source just like any other class in the Java 2 SDK, v 1.4. Provider vendors can either modify their provider to follow the recommended approach for authenticating the framework, or put in a conditional so that the framework authentication code is only executed when the provider is being run with JCE 1.2.1.

Support for Additional Features of PKCS #1, #5 and #8

JCE and JCA have been enhanced to support the additional features of PKCS #1, #5 and #8. The following classes were added:

• java.security.spec.RSAOtherPrimeInfo
• java.security.spec.RSAMultiPrimePrivateCrtKeySpec
• java.security.interfaces.RSAMultiPrimePrivateCrtKey
• java.security.spec.PSSParameterSpec
• javax.crypto.interfaces.PBEKey
• javax.crypto.EncryptedPrivateKeyInfo

The following methods were added to the javax.crypto.spec.PBEKeySpec class:

public PBEKeySpec(char[] password, byte[] salt, 
    int iterationCount, int keyLength)
public PBEKeySpec(char[] password, byte[] salt, 
    int iterationCount)
public final void clearPassword()
public final byte[] getSalt()
public final int getIterationCount()
public final int getKeyLength()

SunJCE Default Blowfish Keysize Has Changed

The SunJCE provider's default keysize for the Blowfish algorithm has changed from 56 bytes to 56 bits.

Cryptographic Concepts

This section provides a high-level description of the concepts implemented by the API, and the exact meaning of the technical terms used in the API specification.

Encryption and Decryption

Encryption is the process of taking data (called cleartext) and a short string (a key), and producing data (ciphertext) meaningless to a third-party who does not know the key. Decryption is the inverse process: that of taking ciphertext and a short key string, and producing cleartext.

Password-Based Encryption

Password-Based Encryption (PBE) derives an encryption key from a password. In order to make the task of getting from password to key very time-consuming for an attacker, most PBE implementations will mix in a random number, known as a salt, to create the key.

Cipher

Encryption and decryption are done using a cipher. A cipher is an object capable of carrying out encryption and decryption according to an encryption scheme (algorithm).

Key Agreement

Key agreement is a protocol by which 2 or more parties can establish the same cryptographic keys, without having to exchange any secret information.

Message Authentication Code

A Message Authentication Code (MAC) provides a way to check the integrity of information transmitted over or stored in an unreliable medium, based on a secret key. Typically, message authentication codes are used between two parties that share a secret key in order to validate information transmitted between these parties.

A MAC mechanism that is based on cryptographic hash functions is referred to as HMAC. HMAC can be used with any cryptographic hash function, e.g., MD5 or SHA-1, in combination with a secret shared key. HMAC is specified in RFC 2104.

Core Classes

• The Cipher Class

  The Cipher class provides the functionality of a cryptographic cipher used for encryption and decryption. It forms the core of the JCE framework.

  Creating a Cipher Object

  Like other engine classes in the API, Cipher objects are created using the getInstance factory methods of the Cipher class. A factory method is a static method that returns an instance of a class, in this case, an instance of Cipher, which implements a requested transformation.

  To create a Cipher object, you must specify the transformation name. You may also specify which provider you want to supply the implementation of the requested transformation:

      public static Cipher getInstance(String transformation);
  
      public static Cipher getInstance(String transformation,
                                       String provider);
  

  If just a transformation name is specified, the system will determine if there is an implementation of the requested transformation available in the environment, and if there is more than one, if there is a preferred one.

  If both a transformation name and a package provider are specified, the system will determine if there is an implementation of the requested transformation in the package requested, and throw an exception if there is not.

  A transformation is a string that describes the operation (or set of operations) to be performed on the given input, to produce some output. A transformation always includes the name of a cryptographic algorithm (e.g., DES), and may be followed by a mode and padding scheme.

  A transformation is of the form:

  • "algorithm/mode/padding" or

  • "algorithm"

  For example, the following are valid transformations:

      "DES/CBC/PKCS5Padding"
  
      "DES"
  

  If no mode or padding have been specified, provider-specific default values for the mode and padding scheme are used. For example, the SunJCE provider uses ECB as the default mode, and PKCS5Padding as the default padding scheme for DES, DES-EDE and Blowfish ciphers. This means that in the case of the SunJCE provider,

      Cipher c1 = Cipher.getInstance("DES/ECB/PKCS5Padding");
  

  and

      Cipher c1 = Cipher.getInstance("DES");
  

  are equivalent statements.

  When requesting a block cipher in stream cipher mode (e.g., DES in CFB or OFB mode), you may optionally specify the number of bits to be processed at a time, by appending this number to the mode name as shown in the "DES/CFB8/NoPadding" and "DES/OFB32/PKCS5Padding" transformations. If no such number is specified, a provider-specific default is used. (For example, the SunJCE provider uses a default of 64 bits.)

  Appendix A of this document contains a list of standard names that can be used to specify the algorithm name, mode, and padding scheme components of a transformation.

  The objects returned by factory methods are uninitialized, and must be initialized before they become usable.

  Initializing a Cipher Object

  A Cipher object obtained via getInstance must be initialized for one of four modes, which are defined as final integer constants in the Cipher class. The modes can be referenced by their symbolic names, which are shown below along with a description of the purpose of each mode:

  • ENCRYPT_MODE

    Encryption of data.

  • DECRYPT_MODE

    Decryption of data.

  • WRAP_MODE

    Wrapping a Key into bytes so that the key can be securely transported.

  • UNWRAP_MODE

    Unwrapping of a previously wrapped key into a java.security.Key object.

  Each of the Cipher initialization methods takes a mode parameter (opmode), and initializes the Cipher object for that mode. Other parameters include the key (key) or certificate containing the key (certificate), algorithm parameters (params), and a source of randomness (random).

  To initialize a Cipher object, call one of the following init methods:

      public void init(int opmode, Key key);
  
      public void init(int opmode, Certificate certificate)
  
      public void init(int opmode, Key key, 
                       SecureRandom random);
  
      public void init(int opmode, Certificate certificate, 
                       SecureRandom random)
  
      public void init(int opmode, Key key,
                       AlgorithmParameterSpec params);
  
      public void init(int opmode, Key key,
                       AlgorithmParameterSpec params,
                       SecureRandom random);
  
      public void init(int opmode, Key key,
                       AlgorithmParameters params)
  
      public void init(int opmode, Key key,
                       AlgorithmParameters params,
                       SecureRandom random)
  

  If a Cipher object that requires parameters (e.g., an initialization vector) is initialized for encryption, and no parameters are supplied to the init method, the underlying cipher implementation is supposed to supply the required parameters itself, either by generating random parameters or by using a default, provider-specific set of parameters.

  However, if a Cipher object that requires parameters is initialized for decryption, and no parameters are supplied to the init method, an InvalidKeyException or InvalidAlgorithmParameterException exception will be raised, depending on the init method that was used.

  See the section about Managing Algorithm Parameters for more details.

  The same parameters that were used for encryption must be used for decryption.

  Note that when a Cipher object is initialized, it loses all previously-acquired state. In other words, initializing a Cipher is equivalent to creating a new instance of that Cipher, and initializing it. For example, if a Cipher is first initialized for decryption with a given key, and then initialized for encryption, it will lose any state acquired while in decryption mode.

  Encrypting and Decrypting Data

  Data can be encrypted or decrypted in one step (single-part operation) or in multiple steps (multiple-part operation). A multiple-part operation is useful if you do not know in advance how long the data is going to be, or if the data is too long to be stored in memory all at once.

  To encrypt or decrypt data in a single step, call one of the doFinal methods:

      public byte[] doFinal(byte[] input);
  
      public byte[] doFinal(byte[] input, int inputOffset,
                            int inputLen);
  
      public int doFinal(byte[] input, int inputOffset, 
                         int inputLen, byte[] output);
  
      public int doFinal(byte[] input, int inputOffset, 
                         int inputLen, byte[] output, int outputOffset)
  

  To encrypt or decrypt data in multiple steps, call one of the update methods:

      public byte[] update(byte[] input);
  
      public byte[] update(byte[] input, int inputOffset, int inputLen);
  
      public int update(byte[] input, int inputOffset, int inputLen,
                        byte[] output);
  
      public int update(byte[] input, int inputOffset, int inputLen,
                        byte[] output, int outputOffset)
  

  A multiple-part operation must be terminated by one of the above doFinal methods (if there is still some input data left for the last step), or by one of the following doFinal methods (if there is no input data left for the last step):

      public byte[] doFinal();
  
      public int doFinal(byte[] output, int outputOffset);
  

  All the doFinal methods take care of any necessary padding (or unpadding), if padding (or unpadding) was requested as part of the specified transformation.

  A call to doFinal resets the Cipher object to the state it was in when initialized via a call to init. That is, the Cipher object is reset and available to encrypt or decrypt (depending on the operation mode that was specified in the call to init) more data.

  Wrapping and Unwrapping Keys

  Wrapping a key enables secure transfer of the key from one place to another.

  The wrap/unwrap API makes it more convenient to write code since it works with key objects directly. These methods also enable the possibility of secure transfer of hardware-based keys.

  To wrap a Key, first initialize the Cipher object for WRAP_MODE, and then call the following:

      public final byte[] wrap(Key key);
  

  If you are supplying the wrapped key bytes (the result of calling wrap) to someone else who will unwrap them, be sure to also send additional information the recipient will need in order to do the unwrap:

  1. the name of the key algorithm, and

  2. the type of the wrapped key (one of Cipher.SECRET_KEY, Cipher.PRIVATE_KEY, or Cipher.PUBLIC_KEY).

  The key algorithm name can be determined by calling the getAlgorithm method from the Key interface:

      public String getAlgorithm();
  

  To unwrap the bytes returned by a previous call to wrap, first initialize a Cipher object for UNWRAP_MODE, then call the following:

      public final Key unwrap(byte[] wrappedKey,
                              String wrappedKeyAlgorithm,
                              int wrappedKeyType));
  

  Here, wrappedKey is the bytes returned from the previous call to wrap, wrappedKeyAlgorithm is the algorithm associated with the wrapped key, and wrappedKeyType is the type of the wrapped key. This must be one of Cipher.SECRET_KEY, Cipher.PRIVATE_KEY, or Cipher.PUBLIC_KEY.

  Managing Algorithm Parameters

  The parameters being used by the underlying Cipher implementation, which were either explicitly passed to the init method by the application or generated by the underlying implementation itself, can be retrieved from the Cipher object by calling its getParameters method, which returns the parameters as a java.security.AlgorithmParameters object (or null if no parameters are being used). If the parameter is an initialization vector (IV), it can also be retrieved by calling the getIV method.

  In the following example, a Cipher object implementing password-based encryption is initialized with just a key and no parameters. However, the selected algorithm for password-based encryption requires two parameters - a salt and an iteration count. Those will be generated by the underlying algorithm implementation itself. The application can retrieve the generated parameters from the Cipher object as follows:

      import javax.crypto.*;
      import java.security.AlgorithmParameters;
  
      // get cipher object for password-based encryption
      Cipher c = Cipher.getInstance("PBEWithMD5AndDES");
  
      // initialize cipher for encryption, without supplying
      // any parameters. Here, "myKey" is assumed to refer 
      // to an already-generated key.
      c.init(Cipher.ENCRYPT_MODE, myKey);
   
      // encrypt some data and store away ciphertext
      // for later decryption
      byte[] cipherText = c.doFinal("This is just an example".getBytes());
  
      // retrieve parameters generated by underlying cipher
      // implementation
      AlgorithmParameters algParams = c.getParameters();
  
      // get parameter encoding and store it away
      byte[] encodedAlgParams = algParams.getEncoded();
  

  The same parameters that were used for encryption must be used for decryption. They can be instantiated from their encoding and used to initialize the corresponding Cipher object for decryption, as follows:

      import javax.crypto.*;
      import java.security.AlgorithmParameters;
  
      // get parameter object for password-based encryption
      AlgorithmParameters algParams;
      algParams = 
        AlgorithmParameters.getInstance("PBEWithMD5AndDES");
  
      // initialize with parameter encoding from above
      algParams.init(encodedAlgParams);
  
      // get cipher object for password-based encryption
      Cipher c = Cipher.getInstance("PBEWithMD5AndDES");
  
      // initialize cipher for decryption, using one of the 
      // init() methods that takes an AlgorithmParameters 
      // object, and pass it the algParams object from above
      c.init(Cipher.DECRYPT_MODE, myKey, algParams);
  

  If you did not specify any parameters when you initialized a Cipher object, and you are not sure whether or not the underlying implementation uses any parameters, you can find out by simply calling the getParameters method of your Cipher object and checking the value returned. A return value of null indicates that no parameters were used.

  The following cipher algorithms implemented by the SunJCE provider use parameters:

  • DES, DES-EDE, and Blowfish, when used in feedback (i.e., CBC, CFB, OFB, or PCBC) mode, use an initialization vector (IV). The javax.crypto.spec.IvParameterSpec class can be used to initialize a Cipher object with a given IV.

  • PBEWithMD5AndDES uses a set of parameters, comprising a salt and an iteration count. The javax.crypto.spec.PBEParameterSpec class can be used to initialize a Cipher object implementing PBEWithMD5AndDES with a given salt and iteration count.

  Note that you do not have to worry about storing or transferring any algorithm parameters for use by the decryption operation if you use the SealedObject class. This class attaches the parameters used for sealing (encryption) to the encrypted object contents, and uses the same parameters for unsealing (decryption).

  Cipher Output Considerations

  Some of the update and doFinal methods of Cipher allow the caller to specify the output buffer into which to encrypt or decrypt the data. In these cases, it is important to pass a buffer that is large enough to hold the result of the encryption or decryption operation.

  The following method in Cipher can be used to determine how big the output buffer should be:

      public int getOutputSize(int inputLen)
  

• The Cipher Stream Classes

  JCE introduces the concept of secure streams, which combine an InputStream or OutputStream with a Cipher object. Secure streams are provided by the CipherInputStream and CipherOutputStream classes.

  • The CipherInputStream Class

    This class is a FilterInputStream that encrypts or decrypts the data passing through it. It is composed of an InputStream, or one of its subclasses, and a Cipher. CipherInputStream represents a secure input stream into which a Cipher object has been interposed. The read methods of CipherInputStream return data that are read from the underlying InputStream but have additionally been processed by the embedded Cipher object. The Cipher object must be fully initialized before being used by a CipherInputStream.

    For example, if the embedded Cipher has been initialized for decryption, the CipherInputStream will attempt to decrypt the data it reads from the underlying InputStream before returning them to the application.

    This class adheres strictly to the semantics, especially the failure semantics, of its ancestor classes java.io.FilterInputStream and java.io.InputStream. This class has exactly those methods specified in its ancestor classes, and overrides them all, so that the data are additonally processed by the embedded cipher. Moreover, this class catches all exceptions that are not thrown by its ancestor classes. In particular, the skip(long) method skips only data that have been processed by the Cipher.

    It is crucial for a programmer using this class not to use methods that are not defined or overridden in this class (such as a new method or constructor that is later added to one of the super classes), because the design and implementation of those methods are unlikely to have considered security impact with regard to CipherInputStream.

    As an example of its usage, suppose cipher1 has been initialized for encryption. The code below demonstrates how to use a CipherInputStream containing that cipher and a FileInputStream in order to encrypt input stream data:

        FileInputStream fis;
        FileOutputStream fos;
        CipherInputStream cis;
    
        fis = new FileInputStream("/tmp/a.txt");
        cis = new CipherInputStream(fis, cipher1);
        fos = new FileOutputStream("/tmp/b.txt");
        byte[] b = new byte[8];
        int i = cis.read(b);
        while (i != -1) {
            fos.write(b, 0, i);
            i = cis.read(b);
        }
    

    The above program reads and encrypts the content from the file /tmp/a.txt and then stores the result (the encrypted bytes) in /tmp/b.txt.

    The following example demonstrates how to easily connect several instances of CipherInputStream and FileInputStream. In this example, assume that cipher1 and cipher2 have been initialized for encryption and decryption (with corresponding keys), respectively.

        FileInputStream fis;
        FileOutputStream fos;
        CipherInputStream cis1, cis2;
    
        fis = new FileInputStream("/tmp/a.txt");
        cis1 = new CipherInputStream(fis, cipher1);
        cis2 = new CipherInputStream(cis1, cipher2);
        fos = new FileOutputStream("/tmp/b.txt");
        byte[] b = new byte[8];
        int i = cis2.read(b);
        while (i != -1) {
            fos.write(b, 0, i);
            i = cis2.read(b);
        }
    

    The above program copies the content from file /tmp/a.txt to /tmp/b.txt, except that the content is first encrypted and then decrypted back when it is read from /tmp/a.txt. Of course since this program simply encrypts text and decrypts it back right away, it's actually not very useful except as a simple way of illustrating chaining of CipherInputStreams.

  • The CipherOutputStream Class

    This class is a FilterOutputStream that encrypts or decrypts the data passing through it. It is composed of an OutputStream, or one of its subclasses, and a Cipher. CipherOutputStream represents a secure output stream into which a Cipher object has been interposed. The write methods of CipherOutputStream first process the data with the embedded Cipher object before writing them out to the underlying OutputStream. The Cipher object must be fully initialized before being used by a CipherOutputStream.

    For example, if the embedded Cipher has been initialized for encryption, the CipherOutputStream will encrypt its data, before writing them out to the underlying output stream.

    This class adheres strictly to the semantics, especially the failure semantics, of its ancestor classes java.io.OutputStream and java.io.FilterOutputStream. This class has exactly those methods specified in its ancestor classes, and overrides them all, so that all data are additionally processed by the embedded cipher. Moreover, this class catches all exceptions that are not thrown by its ancestor classes.

    It is crucial for a programmer using this class not to use methods that are not defined or overridden in this class (such as a new method or constructor that is later added to one of the super classes), because the design and implementation of those methods are unlikely to have considered security impact with regard to CipherOutputStream.

    As an example of its usage, suppose cipher1 has been initialized for encryption. The code below demonstrates how to use a CipherOutputStream containing that cipher and a FileOutputStream in order to encrypt data to be written to an output stream:

        FileInputStream fis;
        FileOutputStream fos;
        CipherOutputStream cos;
    
        fis = new FileInputStream("/tmp/a.txt");
        fos = new FileOutputStream("/tmp/b.txt");
        cos = new CipherOutputStream(fos, cipher1);
        byte[] b = new byte[8];
        int i = fis.read(b);
        while (i != -1) {
            cos.write(b, 0, i);
            i = fis.read(b);
        }
        cos.flush();
    

    The above program reads the content from the file /tmp/a.txt, then encrypts and stores the result (the encrypted bytes) in /tmp/b.txt.

    The following example demonstrates how to easily connect several instances of CipherOutputStream and FileOutputStream. In this example, assume that cipher1 and cipher2 have been initialized for decryption and encryption (with corresponding keys), respectively:

        FileInputStream fis;
        FileOutputStream fos;
        CipherOutputStream cos1, cos2;
    
        fis = new FileInputStream("/tmp/a.txt");
        fos = new FileOutputStream("/tmp/b.txt");
        cos1 = new CipherOutputStream(fos, cipher1);
        cos2 = new CipherOutputStream(cos1, cipher2);
        byte[] b = new byte[8];
        int i = fis.read(b);
        while (i != -1) {
            cos2.write(b, 0, i);
            i = fis.read(b);
        }
        cos2.flush();
    

    The above program copies the content from file /tmp/a.txt to /tmp/b.txt, except that the content is first encrypted and then decrypted back before it is written to /tmp/b.txt.

    There is one important difference between the flush and close methods of this class, which becomes even more relevant if the encapsulated Cipher object implements a block cipher algorithm with padding turned on:

    flush flushes the underlying OutputStream by forcing any buffered output bytes that have already been processed by the encapsulated Cipher object to be written out. Any bytes buffered by the encapsulated Cipher object and waiting to be processed by it will not be written out.

    close closes the underlying OutputStream and releases any system resources associated with it. It invokes the doFinal method of the encapsulated Cipher object, causing any bytes buffered by it to be processed and written out to the underlying stream by calling its flush method.

• The KeyGenerator Class

  A key generator is used to generate secret keys for symmetric algorithms.

  Creating a Key Generator

  Like other engine classes in the API, KeyGenerator objects are created using the getInstance factory methods of the KeyGenerator class. A factory method is a static method that returns an instance of a class, in this case, an instance of KeyGenerator which provides an implementation of the requested key generator.

  getInstance takes as its argument the name of a symmetric algorithm for which a secret key is to be generated. Optionally, a package provider name may be specified:

      public static KeyGenerator getInstance(String algorithm);
  
      public static KeyGenerator getInstance(String algorithm,
                                             String provider);
  

  If just an algorithm name is specified, the system will determine if there is an implementation of the requested key generator available in the environment, and if there is more than one, if there is a preferred one.

  If both an algorithm name and a package provider are specified, the system will determine if there is an implementation of the requested key generator in the package requested, and throw an exception if there is not.

  Initializing a KeyGenerator Object

  A key generator for a particular symmetric-key algorithm creates a symmetric key that can be used with that algorithm. It also associates algorithm-specific parameters (if any) with the generated key.

  There are two ways to generate a key: in an algorithm-independent manner, and in an algorithm-specific manner. The only difference between the two is the initialization of the object:

  • Algorithm-Independent Initialization

    All key generators share the concepts of a keysize and a source of randomness. There is an init method that takes these two universally shared types of arguments. There is also one that takes just a keysize argument, and uses a system-provided source of randomness, and one that takes just a source of randomness:

        public void init(SecureRandom random);
    
        public void init(int keysize);
    
        public void init(int keysize, SecureRandom random);
    

    Since no other parameters are specified when you call the above algorithm-independent init methods, it is up to the provider what to do about the algorithm-specific parameters (if any) to be associated with the generated key.

  • Algorithm-Specific Initialization

    For situations where a set of algorithm-specific parameters already exists, there are two init methods that have an AlgorithmParameterSpec argument. One also has a SecureRandom argument, while the source of randomness is system-provided for the other:

        public void init(AlgorithmParameterSpec params);
    
        public void init(AlgorithmParameterSpec params,
                         SecureRandom random);
    

  In case the client does not explicitly initialize the KeyGenerator (via a call to an init method), each provider must supply (and document) a default initialization.

  Creating a Key

  The following method generates a secret key:

      public SecretKey generateKey();
  

• The SecretKeyFactory Class

  This class represents a factory for secret keys.

  Key factories are used to convert keys (opaque cryptographic keys of type java.security.Key) into key specifications (transparent representations of the underlying key material in a suitable format), and vice versa.

  A javax.crypto.SecretKeyFactory object operates only on secret (symmetric) keys, whereas a java.security.KeyFactory object processes the public and private key components of a key pair.

  Objects of type java.security.Key, of which java.security.PublicKey, java.security.PrivateKey, and javax.crypto.SecretKey are subclasses, are opaque key objects, because you cannot tell how they are implemented. The underlying implementation is provider-dependent, and may be software or hardware based. Key factories allow providers to supply their own implementations of cryptographic keys.

  For example, if you have a key specification for a Diffie Hellman public key, consisting of the public value y, the prime modulus p, and the base g, and you feed the same specification to Diffie-Hellman key factories from different providers, the resulting PublicKey objects will most likely have different underlying implementations.

  A provider should document the key specifications supported by its secret key factory. For example, the SecretKeyFactory for DES keys supplied by the "SunJCE" provider supports DESKeySpec as a transparent representation of DES keys, the SecretKeyFactory for DES-EDE keys supports DESedeKeySpec as a transparent representation of DES-EDE keys, and the SecretKeyFactory for PBE supports PBEKeySpec as a transparent representation of the underlying password.

  The following is an example of how to use a SecretKeyFactory to convert secret key data into a SecretKey object, which can be used for a subsequent Cipher operation:

      // Note the following bytes are not realistic secret key data 
      // bytes but are simply supplied as an illustration of using data
      // bytes (key material) you already have to build a DESKeySpec.
      byte[] desKeyData = { (byte)0x01, (byte)0x02, (byte)0x03, 
          (byte)0x04, (byte)0x05, (byte)0x06, (byte)0x07, (byte)0x08 };
      DESKeySpec desKeySpec = new DESKeySpec(desKeyData);
      SecretKeyFactory keyFactory = SecretKeyFactory.getInstance("DES");
      SecretKey secretKey = keyFactory.generateSecret(desKeySpec);
  

  In this case, the underlying implementation of secretKey is based on the provider of keyFactory.

  An alternative, provider-independent way of creating a functionally equivalent SecretKey object from the same key material is to use the javax.crypto.spec.SecretKeySpec class, which implements the javax.crypto.SecretKey interface:

      byte[] desKeyData = { (byte)0x01, (byte)0x02, ...};
      SecretKeySpec secretKey = new SecretKeySpec(desKeyData, "DES");
  

• The SealedObject Class

  This class enables a programmer to create an object and protect its confidentiality with a cryptographic algorithm.

  Given any object that implements the java.io.Serializable interface, one can create a SealedObject that encapsulates the original object, in serialized format (i.e., a "deep copy"), and seals (encrypts) its serialized contents, using a cryptographic algorithm such as DES, to protect its confidentiality. The encrypted content can later be decrypted (with the corresponding algorithm using the correct decryption key) and de-serialized, yielding the original object.

  A typical usage is illustrated in the following code segment: In order to seal an object, you create a SealedObject from the object to be sealed and a fully initialized Cipher object that will encrypt the serialized object contents. In this example, the String "This is a secret" is sealed using the DES algorithm. Note that any algorithm parameters that may be used in the sealing operation are stored inside of SealedObject:

      // create Cipher object
      // Note: sKey is assumed to refer to an already-generated
      // secret DES key.
      Cipher c = Cipher.getInstance("DES");
      c.init(Cipher.ENCRYPT_MODE, sKey);
  
      // do the sealing
      SealedObject so = new SealedObject("This is a secret", c);
  

  The original object that was sealed can be recovered in two different ways:

  • by using a Cipher object that has been initialized with the exact same algorithm, key, padding scheme, etc., that were used to seal the object:

        c.init(Cipher.DECRYPT_MODE, sKey);
        try {
            String s = (String)so.getObject(c);
        } catch (Exception e) {
            // do something
        };
    

    This approach has the advantage that the party who unseals the sealed object does not require knowledge of the decryption key. For example, after one party has initialized the cipher object with the required decryption key, it could hand over the cipher object to another party who then unseals the sealed object.

  • by using the appropriate decryption key (since DES is a symmetric encryption algorithm, we use the same key for sealing and unsealing):

        try {
            String s = (String)so.getObject(sKey);
        } catch (Exception e) {
            // do something
        };
    

    In this approach, the getObject method creates a cipher object for the appropriate decryption algorithm and initializes it with the given decryption key and the algorithm parameters (if any) that were stored in the sealed object. This approach has the advantage that the party who unseals the object does not need to keep track of the parameters (e.g., the IV) that were used to seal the object.

• The KeyAgreement Class

  The KeyAgreement class provides the functionality of a key agreement protocol. The keys involved in establishing a shared secret are created by one of the key generators (KeyPairGenerator or KeyGenerator), a KeyFactory, or as a result from an intermediate phase of the key agreement protocol.

  Creating a KeyAgreement Object

  Each party involved in the key agreement has to create a KeyAgreement object. Like other engine classes in the API, KeyAgreement objects are created using the getInstance factory methods of the KeyAgreement class. A factory method is a static method that returns an instance of a class, in this case, an instance of KeyAgreement which provides the requested key agreement algorithm.

  getInstance takes as its argument the name of a key agreement algorithm. Optionally, a package provider name may be specified:

      public static KeyAgreement getInstance(String algorithm);
  
      public static KeyAgreement getInstance(String algorithm,
                                             String provider);
  

  If just an algorithm name is specified, the system will determine if there is an implementation of the requested key agreement available in the environment, and if there is more than one, if there is a preferred one.

  If both an algorithm name and a package provider are specified, the system will determine if there is an implementation of the requested key agreement in the package requested, and throw an exception if there is not.

  Initializing a KeyAgreement Object

  You initialize a KeyAgreement object with your private information. In the case of Diffie-Hellman, you initialize it with your Diffie-Hellman private key. Additional initialization information may contain a source of randomness and/or a set of algorithm parameters. Note that if the requested key agreement algorithm requires the specification of algorithm parameters, and only a key, but no parameters are provided to initialize the KeyAgreement object, the key must contain the required algorithm parameters. (For example, the Diffie-Hellman algorithm uses a prime modulus p and a base generator g as its parameters.)

  To initialize a KeyAgreement object, call one of its init methods:

      public void init(Key key);
  
      public void init(Key key, SecureRandom random);
  
      public void init(Key key, AlgorithmParameterSpec params);
  
      public void init(Key key, AlgorithmParameterSpec params,
                       SecureRandom random);
  

  Executing a KeyAgreement Phase

  Every key agreement protocol consists of a number of phases that need to be executed by each party involved in the key agreement.

  To execute the next phase in the key agreement, call the doPhase method:

      public Key doPhase(Key key, boolean lastPhase);
  

  The key parameter contains the key to be processed by that phase. In most cases, this is the public key of one of the other parties involved in the key agreement, or an intermediate key that was generated by a previous phase. doPhase may return an intermediate key that you may have to send to the other parties of this key agreement, so they can process it in a subsequent phase.

  The lastPhase parameter specifies whether or not the phase to be executed is the last one in the key agreeement: A value of FALSE indicates that this is not the last phase of the key agreement (there are more phases to follow), and a value of TRUE indicates that this is the last phase of the key agreement and the key agreement is completed, i.e., generateSecret can be called next.

  In the example of Diffie-Hellman between two parties (see Appendix F), you call doPhase once, with lastPhase set to TRUE. In the example of Diffie-Hellman between three parties, you call doPhase twice: the first time with lastPhase set to FALSE, the 2nd time with lastPhase set to TRUE.

  Generating the Shared Secret

  After each party has executed all the required key agreement phases, it can compute the shared secret by calling one of the generateSecret methods:

      public byte[] generateSecret();
  
      public int generateSecret(byte[] sharedSecret, int offset);
  
      public SecretKey generateSecret(String algorithm);
  

• The Mac Class

  The Mac class provides the functionality of a Message Authentication Code (MAC). Please refer to the code example in Appendix F.

  Creating a Mac Object

  Like other engine classes in the API, Mac objects are created using the getInstance factory methods of the Mac class. A factory method is a static method that returns an instance of a class, in this case, an instance of Mac which provides the requested MAC algorithm.

  getInstance takes as its argument the name of a MAC algorithm. Optionally, a package provider name may be specified:

      public static Mac getInstance(String algorithm);
  
      public static Mac getInstance(String algorithm,
                                    String provider);
  

  If just an algorithm name is specified, the system will determine if there is an implementation of the requested MAC algorithm available in the environment, and if there is more than one, if there is a preferred one.

  If both an algorithm name and a package provider are specified, the system will determine if there is an implementation of the requested MAC algorithm in the package requested, and throw an exception if there is not.

  Initializing a Mac Object

  A Mac object is always initialized with a (secret) key and may optionally be initialized with a set of parameters, depending on the underlying MAC algorithm.

  To initialize a Mac object, call one of its init methods:

      public void init(Key key);
  
      public void init(Key key, AlgorithmParameterSpec params);
  

  You can initialize your Mac object with any (secret-)key object that implements the javax.crypto.SecretKey interface. This could be an object returned by javax.crypto.KeyGenerator.generateKey(), or one that is the result of a key agreement protocol, as returned by javax.crypto.KeyAgreement.generateSecret(), or an instance of javax.crypto.spec.SecretKeySpec.

  With some MAC algorithms, the (secret-)key algorithm associated with the (secret-)key object used to initialize the Mac object does not matter (this is the case with the HMAC-MD5 and HMAC-SHA1 implementations of the SunJCE provider). With others, however, the (secret-)key algorithm does matter, and an InvalidKeyException is thrown if a (secret-)key object with an inappropriate (secret-)key algorithm is used.

  Computing a MAC

  A MAC can be computed in one step (single-part operation) or in multiple steps (multiple-part operation). A multiple-part operation is useful if you do not know in advance how long the data is going to be, or if the data is too long to be stored in memory all at once.

  To compute the MAC of some data in a single step, call the following doFinal method:

      public byte[] doFinal(byte[] input);
  

  To compute the MAC of some data in multiple steps, call one of the update methods:

      public void update(byte input);
  
      public void update(byte[] input);
  
      public void update(byte[] input, int inputOffset, int inputLen);
  

  A multiple-part operation must be terminated by the above doFinal method (if there is still some input data left for the last step), or by one of the following doFinal methods (if there is no input data left for the last step):

      public byte[] doFinal();
  
      public void doFinal(byte[] output, int outOffset);
  

How to Make Applications "Exempt" from Cryptographic Restrictions

[Note 1: This section should be ignored by most application developers. It is only for people whose applications may be exported to those few countries whose governments mandate cryptographic restrictions, if it desired that such applications have fewer cryptographic restrictions than those mandated. If you want to skip this section, you can go on to Installing JCE Providers for the Java 2 SDK, v 1.4.]

[Note 2: Throughout this section, the term "application" is meant to encompass both applications and applets.]

The JCE framework within the Java 2 SDK, v 1.4 includes an ability to enforce restrictions regarding the cryptographic algorithms and maximum cryptographic strengths available to applets/applications in different jurisdiction contexts (locations). Any such restrictions are specified in "jurisdiction policy files".

Due to import control restrictions by the governments of a few countries, the jurisdiction policy files shipped with the Java 2 SDK, v 1.4 from Sun Microsystems specify that "strong" but limited cryptography may be used. An "unlimited strength" version of these files indicating no restrictions on cryptographic strengths is available for those living in eligible countries (which is most countries). But only the "strong" version can be imported into those countries whose governments mandate restrictions. The JCE framework will enforce the restrictions specified in the installed jurisdiction policy files.

It is possible that the governments of some or all such countries may allow certain applications to become exempt from some or all cryptographic restrictions. For example, they may consider certain types of applications as "special" and thus exempt. Or they may exempt any application that utilizes an "exemption mechanism," such as key recovery. Applications deemed to be exempt could get access to stronger cryptography than that allowed for non-exempt applications in such countries.

In order for an application to be recognized as "exempt" at runtime, it must meet the following conditions:

• It must have a permission policy file bundled with it in a JAR file. The permission policy file specifies what cryptography-related permissions the application has, and under what conditions (if any).

• The JAR file containing the application and the permission policy file must have been signed using a code-signing certificate issued after the application was accepted as exempt.

Below are sample steps required in order to make an application exempt from some or all cryptographic restrictions. This is a basic outline that includes information about what is required by JCE in order to recognize and treat applications as being exempt. You will need to know the exemption requirements of the particular country or countries in which you would like your application to be able to be run but whose governments require cryptographic restrictions. You will also need to know the requirements of a JCE framework vendor that has a process in place for handling exempt applications. Consult such a vendor for further information. (Note: The SunJCE provider does not supply an implementation of the ExemptionMechanismSpi class.)

• Step 1: Write and Compile Your Application Code

• Step 2: Create a Permission Policy File Granting Appropriate Cryptographic Permissions

• Step 3: Prepare for Testing

  Step 3a: Apply for Government Approval From the Government Mandating Restrictions.

  Step 3b: Get a Code-Signing Certificate

  Step 3c: Bundle the Application and Permission Policy File into a JAR file

  Step 3d: Sign the JAR file

  Step 3e: Set Up Your Environment Like That of a User in a Restricted Country

  Step 3f: (only for apps using exemption mechanisms) Install a Provider Implementing the Exemption Mechanism Specified in the Permission Policy File

• Step 4: Test Your Application

• Step 5: Apply for U.S. Government Export Approval If Required

• Step 6: Deploy Your Application

Special Code Requirements for Applications that Use Exemption Mechanisms

When an application has a permission policy file associated with it (in the same JAR file) and that permission policy file specifies an exemption mechanism, then when the Cipher getInstance method is called to instantiate a Cipher, the JCE code searches the installed providers for one that implements the specified exemption mechanism. If it finds such a provider, JCE instantiates an ExemptionMechanism API object associated with the provider's implementation, and then associates the ExemptionMechanism object with the Cipher returned by getInstance.

After instantiating a Cipher, and prior to initializing it (via a call to the Cipher init method), your code must call the following Cipher method:

    public ExemptionMechanism getExemptionMechanism()

This call returns the ExemptionMechanism object associated with the Cipher. You must then initialize the exemption mechanism implementation by calling the following method on the returned ExemptionMechanism:

     public final void init(Key key)

The argument you supply should be the same as the argument of the same types that you will subsequently supply to a Cipher init method.

Once you have initialized the ExemptionMechanism, you can proceed as usual to initialize and use the Cipher.

Permission Policy Files

In order for an application to be recognized at runtime as being "exempt" from some or all cryptographic restrictions, it must have a permission policy file bundled with it in a JAR file. The permission policy file specifies what cryptography-related permissions the application has, and under what conditions (if any).

Note: The permission policy file bundled with an application must be named cryptoPerms.

The format of a permission entry in a permission policy file that accompanies an exempt application is the same as the format for a jurisdiction policy file downloaded with the Java 2 SDK, v 1.4, which is:

permission <crypto permission class name>[ <alg_name>
    [[, <exemption mechanism name>][, <maxKeySize>
    [, <AlgorithmParameterSpec class name>,
    <parameters for constructing an AlgorithmParameterSpec object>]]]];

See Appendix D for more information about the jurisdiction policy file format.

Permission Policy Files for Exempt Applications

Some applications may be allowed to be completely unrestricted. Thus, the permission policy file that accompanies such an application usually just needs to contain the following:

grant {
    // There are no restrictions to any algorithms.
    permission javax.crypto.CryptoAllPermission;
};

If an application just uses a single algorithm (or several specific algorithms), then the permission policy file could simply mention that algorithm (or algorithms) explicitly, rather than granting CryptoAllPermission. For example, if an application just uses the Blowfish algorithm, the permission policy file doesn't have to grant CryptoAllPermission to all algorithms. It could just specify that there is no cryptographic restriction if the Blowfish algorithm is used. In order to do this, the permission policy file would look like the following:

grant {
    permission javax.crypto.CryptoPermission "Blowfish";
};

Permission Policy Files for Applications Exempt Due to Exemption Mechanisms

If an application is considered "exempt" if an exemption mechanism is enforced, then the permission policy file that accompanies the application must specify one or more exemption mechanisms. At runtime, the application will be considered exempt if any of those exemption mechanisms is enforced. Each exemption mechanism must be specified in a permission entry that looks like the following:

    // No algorithm restrictions if specified
    // exemption mechanism is enforced.
    permission javax.crypto.CryptoPermission *, 
        "<ExemptionMechanismName>";

where <ExemptionMechanismName> specifies the name of an exemption mechanism. The list of possible exemption mechanism names includes:

• KeyRecovery

• KeyEscrow

• KeyWeakening

As an example, suppose your application is exempt if either key recovery or key escrow is enforced. Then your permission policy file should contain the following:

grant {
    // No algorithm restrictions if KeyRecovery is enforced.
    permission javax.crypto.CryptoPermission *, 
        "KeyRecovery";
    // No algorithm restrictions if KeyEscrow is enforced.
    permission javax.crypto.CryptoPermission *, 
        "KeyEscrow";
};

Note: Permission entries that specify exemption mechanisms should not also specify maximum key sizes. The allowed key sizes are actually determined from the installed exempt jurisdiction policy files, as described in the next section.

How Bundled Permission Policy Files Affect Cryptographic Permissions

At runtime, when an application instantiates a Cipher (via a call to its getInstance method) and that application has an associated permission policy file, JCE checks to see whether the permission policy file has an entry that applies to the algorithm specified in the getInstance call. If it does, and the entry grants CryptoAllPermission or does not specify that an exemption mechanism must be enforced, it means there is no cryptographic restriction for this particular algorithm.

If the permission policy file has an entry that applies to the algorithm specified in the getInstance call and the entry does specify that an exemption mechanism must be enforced, then the exempt jurisdiction policy file(s) are examined. If the exempt permissions include an entry for the relevant algorithm and exemption mechanism, and that entry is implied by the permissions in the permission policy file bundled with the application, and if there is an implementation of the specified exemption mechanism available from one of the registered providers, then the maximum key size and algorithm parameter values for the Cipher are determined from the exempt permission entry.

If there is no exempt permission entry implied by the relevant entry in the permission policy file bundled with the application, or if there is no implementation of the specified exemption mechanism available from any of the registered providers, then the application is only allowed the standard default cryptographic permissions.

Installing JCE Providers for the Java 2 SDK, v 1.4

In order to be used, a cryptographic provider must be installed and registered, either statically or dynamically. Cryptographic providers for JCE in the Java 2 SDK, v 1.4 are installed and configured the same way as all other providers for the Java^TM 2 platform. More information about installing and configuring providers can be found in the Installing Providers section of the Java^TM Cryptography Architecture API Specification & Reference document.

You do not need to register the "SunJCE" provider because it is pre-registered. If you want to use other providers, read the following sections to see how to register them.

Installing a provider is done in two steps: installing the provider package classes, and configuring the provider. In some situations you will also need to set permissions for the provider prior to using it.

Installing the Provider Classes

The first thing you must do is make the provider classes available so that they can be found when requested. Provider classes are shipped as a signed JAR (Java ARchive) file.

There are two possible ways to install the provider classes:

• Install the JAR file containing the provider classes as an "installed" or "bundled" extension.
• Place the JAR file containing the provider classes in your class path.

The provider JAR file will be considered an installed extension if it is placed in the standard place for the JAR files of an installed extension:

<java-home>/lib/ext         [Solaris]
<java-home>\lib\ext         [Windows]

Here <java-home> refers to the directory where the runtime software is installed, which is the top-level directory of the Java^TM 2 Runtime Environment (JRE) or the jre directory in the Java^TM 2 SDK (Java 2 SDK) software. For example, if you have the Java 2 SDK, v 1.4 installed on Solaris in a directory named /home/user1/Java 2 SDK1.4.0, or on Microsoft Windows in a directory named C:\Java 2 SDK1.4.0, then you need to install the JAR file in the following directory:

/home/user1/Java 2 SDK1.4.0/jre/lib/ext    [Solaris]
C:\Java 2 SDK1.4.0\jre\lib\ext             [Windows]

Similarly, if you have the JRE, v 1.4 installed on Solaris in a directory named /home/user1/j2re1.4.0, or on Microsoft Windows in a directory named C:\j2re1.4.0, you need to install the JAR file in the following directory:

/home/user1/j2re1.4.0/lib/ext         [Solaris]
C:\j2re1.4.0\lib\ext                  [Windows]

For more information, refer to these sections in the "Extension Mechanism Architecture" specification: Installed Extensions and Bundled Extensions.

Configuring the Provider

The next step is to add the provider to your list of approved providers. This is done statically by editing the security properties file

<java-home>/lib/security/java.security     [Solaris]
<java-home>\lib\security\java.security     [Windows]

Here <java-home> refers to the directory where the JRE was installed. For example, if you have the Java 2 SDK v 1.4 installed on Solaris in a directory named /home/user1/Java 2 SDK1.4.0, or on Microsoft Windows in a directory named C:\Java 2 SDK1.4.0, then you need to edit the following file:

/home/user1/Java 2 SDK1.4.0/jre/lib/security/java.security  [Solaris]
C:\Java 2 SDK1.4.0\jre\lib\security\java.security           [Windows]

Similarly, if you have the Java 2 Runtime Environment, v 1.4 installed on Solaris in a directory named /home/user1/j2re1.4.0, or on Microsoft Windows in a directory named C:\j2re1.4.0, then you need to edit this file:

/home/user1/j2re1.4.0/lib/security/java.security       [Solaris]
C:\j2re1.4.0\lib\security\java.security                [Windows]

For each provider, this file should have a statement of the following form:

    security.provider.n=masterClassName

This declares a provider, and specifies its preference order n. The preference order is the order in which providers are searched for requested algorithms when no specific provider is requested. The order is 1-based; 1 is the most preferred, followed by 2, and so on.

masterClassName must specify the fully qualified name of the provider's "master class". The provider vendor should supply you this name.

The Java 2 SDK, v 1.4 comes standard with a provider named "SUN", which is automatically configured as a static provider in the java.security properties file, as follows:

security.provider.1=sun.security.provider.Sun

(The "SUN" provider's master class is the Sun class in the sun.security.provider package.)

The JCE provider "SunJCE" and other security-related providers shipped with the Java 2 platform are also automatically configured as static providers.

To utilize another JCE provider, add a line registering the alternate provider, giving it whatever preference order you prefer (and making corresponding adjustments to the other providers' orders, if needed).

Suppose that the master class of a provider you want to register is the CryptoX class in the com.cryptox.provider package, and that you would like to make this provider the second preferred provider. To do so, add the following line to the java.security file below the line for the "SUN" provider, and increment the preference order numbers for all other providers whose numbers were greater than or equal to 2 before your addition:

    security.provider.2=com.cryptox.provider.CryptoX

Note: Providers may also be registered dynamically. To do so, a program can call either the addProvider or insertProviderAt method in the Security class. This type of registration is not persistent and can only be done by code which is granted the following permission:

java.security.SecurityPermission "insertProvider.{name}"

where {name} is replaced by the actual provider name. For example, if the provider name is "MyJCE" and if your code that dynamically registers this provider is in the MyApp.jar file in the /localWork directory, then here is a sample policy file grant statement granting that permission:

grant codeBase "file:/localWork/MyApp.jar" {
  permission java.security.SecurityPermission
      "insertProvider.MyJCE";
};

Setting Provider Permissions

Whenever JCE providers are not installed extensions, permissions must be granted for when applets or applications using JCE are run while a security manager is installed. There is typically a security manager installed whenever an applet is running, and a security manager may be installed for an application either via code in the application itself or via a command-line argument. Permissions do not need to be granted to installed extensions, since the default system policy configuration file grants all permissions to installed extensions.

The documentation from the vendor of each provider you will be using should include information as to which permissions it requires, and how to grant such permissions. For example, the following permissions may be needed by a provider if it is not an installed extension and a security manager is installed:

• java.lang.RuntimePermission to get class protection domains. The provider may need to get its own protection domain in the process of doing self-integrity checking.

• java.security.SecurityPermission "putProviderProperty.{name}" to set provider properties, where {name} is replaced by the actual provider name.

For example, a sample statement granting permissions to a provider whose name is "MyJCE" and whose code is in myjce_provider.jar appears below. Such a statement could appear in a policy file. In this example, the myjce_provider.jar file is assumed to be in the /localWork directory.

grant codeBase "file:/localWork/myjce_provider.jar" {
  permission java.lang.RuntimePermission "getProtectionDomain";
  permission java.security.SecurityPermission
      "putProviderProperty.MyJCE";
};

JCE Keystore

The "SunJCE" provider supplies its own implementation of the java.security.KeyStore class in the Java 2 SDK, v 1.4. Its implementation employs a much stronger protection of private keys (using password-based encryption with Triple DES) than the keystore implementation supplied by the "SUN" provider in the Java 2 SDK, v 1.4. (Note that because the Java 2 SDK, v 1.4 is distributed world-wide in binary and source format, it cannot employ any strong encryption mechanisms.)

In order to take advantage of the keystore implementation of the "SunJCE" provider, you specify "JCEKS" as the keystore type.

You may upgrade your keystore of type "JKS" - this is the name of the keystore type implemented by the "SUN" provider in the Java 2 SDK - to a JCE keystore of type "JCEKS" by changing the password of a private-key entry in your keystore.

To apply the cryptographically strong(er) key protection supplied by "SunJCE" to a private key named "signkey" in your default keystore, use the following command, which will prompt you for the old and new key passwords:

    keytool -keypasswd -alias signkey -storetype jceks

You may want to change the password back to its old value, using the same command.

See Security Tools for more information about keytool and about keystores and how they are managed.

Code Examples

This section is a short tutorial on how to use some of the major features of the JCE APIs in the Java 2 SDK, v 1.4. Complete sample programs that exercise the APIs can be found in Appendix F of this document.

Using Encryption

This section takes the user through the process of generating a key, creating and initializing a cipher object, encrypting a file, and then decrypting it. Throughout this example, we use the Data Encryption Standard (DES).

Generating a Key

To create a DES key, we have to instantiate a KeyGenerator for DES. We do not specify a provider, because we do not care about a particular DES key generation implementation. Since we do not initialize the KeyGenerator, a system-provided source of randomness will be used to create the DES key:

    KeyGenerator keygen = KeyGenerator.getInstance("DES");
    SecretKey desKey = keygen.generateKey();

After the key has been generated, the same KeyGenerator object can be re-used to create further keys.

Creating a Cipher

The next step is to create a Cipher instance. To do this, we use one of the getInstance factory methods of the Cipher class. We must specify the name of the requested transformation, which includes the following components, separated by slashes (/):

• the algorithm name
• the mode (optional)
• the padding scheme (optional)

In this example, we create a DES (Data Encryption Standard) cipher in Electronic Codebook mode, with PKCS #5-style padding. We do not specify a provider, because we do not care about a particular implementation of the requested transformation.

The standard algorithm name for DES is "DES", the standard name for the Electronic Codebook mode is "ECB", and the standard name for PKCS #5-style padding is "PKCS5Padding":

    Cipher desCipher;

    // Create the cipher 
    desCipher = Cipher.getInstance("DES/ECB/PKCS5Padding");

We use the generated desKey from above to initialize the Cipher object for encryption:

    // Initialize the cipher for encryption
    desCipher.init(Cipher.ENCRYPT_MODE, desKey);

    // Our cleartext
    byte[] cleartext = "This is just an example".getBytes();

    // Encrypt the cleartext
    byte[] ciphertext = desCipher.doFinal(cleartext);

    // Initialize the same cipher for decryption
    desCipher.init(Cipher.DECRYPT_MODE, desKey);

    // Decrypt the ciphertext
    byte[] cleartext1 = desCipher.doFinal(ciphertext);

cleartext and cleartext1 are identical.

Using Password-Based Encryption

In this example, we prompt the user for a password from which we derive an encryption key.

It would seem logical to collect and store the password in an object of type java.lang.String. However, here's the caveat: Objects of type String are immutable, i.e., there are no methods defined that allow you to change (overwrite) or zero out the contents of a String after usage. This feature makes String objects unsuitable for storing security sensitive information such as user passwords. You should always collect and store security sensitive information in a char array instead.

For that reason, the javax.crypto.spec.PBEKeySpec class takes (and returns) a password as a char array.

The following method is an example of how to collect a user password as a char array:

    /**
     * Reads user password from given input stream.
     */
    public char[] readPasswd(InputStream in) throws IOException {
        char[] lineBuffer;
        char[] buf;
        int i;

        buf = lineBuffer = new char[128];

        int room = buf.length;
        int offset = 0;
        int c;

loop:   while (true) {
            switch (c = in.read()) {
              case -1: 
              case '\n':
                break loop;

              case '\r':
                int c2 = in.read();
                if ((c2 != '\n') && (c2 != -1)) {
                    if (!(in instanceof PushbackInputStream)) {
                        in = new PushbackInputStream(in);
                    }
                    ((PushbackInputStream)in).unread(c2);
                } else 
                    break loop;

              default:
                if (--room < 0) {
                    buf = new char[offset + 128];
                    room = buf.length - offset - 1;
                    System.arraycopy(lineBuffer, 0, buf, 0, offset);
                    Arrays.fill(lineBuffer, ' ');
                    lineBuffer = buf;
                }
                buf[offset++] = (char) c;
                break;
            }
        }

        if (offset == 0) {
            return null;
        }

        char[] ret = new char[offset];
        System.arraycopy(buf, 0, ret, 0, offset);
        Arrays.fill(buf, ' ');

        return ret;
    }

In order to use Password-Based Encryption (PBE) as defined in PKCS #5, we have to specify a salt and an iteration count. The same salt and iteration count that are used for encryption must be used for decryption:

    PBEKeySpec pbeKeySpec;
    PBEParameterSpec pbeParamSpec;
    SecretKeyFactory keyFac;

    // Salt
    byte[] salt = {
        (byte)0xc7, (byte)0x73, (byte)0x21, (byte)0x8c,
        (byte)0x7e, (byte)0xc8, (byte)0xee, (byte)0x99
    };

    // Iteration count
    int count = 20;

    // Create PBE parameter set
    pbeParamSpec = new PBEParameterSpec(salt, count);

    // Prompt user for encryption password.
    // Collect user password as char array (using the
    // "readPasswd" method from above), and convert
    // it into a SecretKey object, using a PBE key
    // factory.
    System.out.print("Enter encryption password:  ");
    System.out.flush();
    pbeKeySpec = new PBEKeySpec(readPasswd(System.in));
    keyFac = SecretKeyFactory.getInstance("PBEWithMD5AndDES");
    SecretKey pbeKey = keyFac.generateSecret(pbeKeySpec);

    // Create PBE Cipher
    Cipher pbeCipher = Cipher.getInstance("PBEWithMD5AndDES");

    // Initialize PBE Cipher with key and parameters
    pbeCipher.init(Cipher.ENCRYPT_MODE, pbeKey, pbeParamSpec);

    // Our cleartext
    byte[] cleartext = "This is another example".getBytes();

    // Encrypt the cleartext
    byte[] ciphertext = pbeCipher.doFinal(cleartext);

Using Key Agreement

Please refer to Appendix F for sample programs exercising the Diffie-Hellman key exchange between 2 and 3 parties, respectively.

Appendix A: Standard Names

The JCE API requires and utilizes a set of standard names for algorithms, algorithm modes, and padding schemes. This specification establishes the following names as standard names. It supplements the list of standard names defined in Appendix A in the Java^TM Cryptography Architecture API Specification & Reference. Note that algorithm names are treated case-insensitively.

In some cases naming conventions are suggested for forming names that are not explicitly listed, to facilitate name consistency across provider implementations. Such suggestions use items in angle brackets (such as <digest> and <encryption>) as placeholders to be replaced by specific message digest, encryption algorithm, and other names.

Cipher

Algorithm

The following names can be specified as the algorithm component in a transformation when requesting an instance of Cipher:

• AES: Advanced Encryption Standard as specified by NIST in a draft FIPS. Based on the Rijndael algorithm by Joan Daemen and Vincent Rijmen, AES is a 128-bit block cipher supporting keys of 128, 192, and 256 bits.

• Blowfish: The block cipher designed by Bruce Schneier.

• DES: The Digital Encryption Standard as described in FIPS PUB 46-2.

• DESede: Triple DES Encryption (DES-EDE).

• PBEWith<digest>And<encryption> or PBEWith<prf>And<encryption>: The password-based encryption algorithm (PKCS #5), using the specified message digest (<digest>) or pseudo-random function (<prf>) and encryption algorithm (<encryption>). Examples:
  • PBEWithMD5AndDES: The password-based encryption algorithm as defined in: RSA Laboratories, "PKCS #5: Password-Based Encryption Standard," version 1.5, Nov 1993. Note that this algorithm implies CBC as the cipher mode and PKCS5Padding as the padding scheme and cannot be used with any other cipher modes or padding schemes.

  • PBEWithHmacSHA1AndDESede: The password-based encryption algorithm as defined in: RSA Laboratories, "PKCS #5: Password-Based Cryptography Standard," version 2.0, March 1999.

• RC2, RC4, and RC5: Variable-key-size encryption algorithms developed by Ron Rivest for RSA Data Security, Inc.

• RSA: The RSA encryption algorithm as defined in PKCS #1.

Mode

The following names can be specified as the mode component in a transformation when requesting an instance of Cipher:

• NONE: No mode.

• CBC: Cipher Block Chaining Mode, as defined in FIPS PUB 81.

• CFB: Cipher Feedback Mode, as defined in FIPS PUB 81.

• ECB: Electronic Codebook Mode, as defined in: The National Institute of Standards and Technology (NIST) Federal Information Processing Standard (FIPS) PUB 81, "DES Modes of Operation," U.S. Department of Commerce, Dec 1980.

• OFB: Output Feedback Mode, as defined in FIPS PUB 81.

• PCBC: Propagating Cipher Block Chaining, as defined by Kerberos V4.

Padding

The following names can be specified as the padding component in a transformation when requesting an instance of Cipher:

• NoPadding: No padding.

• OAEPWith<digest>And<mgf>Padding: Optimal Asymmetric Encryption Padding scheme defined in PKCS #1, where <digest> should be replaced by the message digest and <mgf> by the mask generation function. Example: OAEPWithMD5AndMGF1Padding.

• PKCS5Padding: The padding scheme described in: RSA Laboratories, "PKCS #5: Password-Based Encryption Standard," version 1.5, November 1993.

• SSL3Padding: The padding scheme defined in the SSL Protocol Version 3.0, November 18, 1996, section 5.2.3.2 (CBC block cipher):

      block-ciphered struct {
          opaque content[SSLCompressed.length];
          opaque MAC[CipherSpec.hash_size];
          uint8 padding[GenericBlockCipher.padding_length];
          uint8 padding_length;
      } GenericBlockCipher;
  

  The size of an instance of a GenericBlockCipher must be a multiple of the block cipher's block length.

  The padding length, which is always present, contributes to the padding, which implies that if:

      sizeof(content) + sizeof(MAC) % block_length = 0,
  

  padding has to be (block_length - 1) bytes long, because of the existence of padding_length.

  This make the padding scheme similar (but not quite) to PKCS5Padding, where the padding length is encoded in the padding (and ranges from 1 to block_length). With the SSL scheme, the sizeof(padding) is encoded in the always present padding_length and therefore ranges from 0 to block_length-1.

  Note that this padding mechanism is not supported by the "SunJCE" provider.

KeyAgreement

The following algorithm names can be specified when requesting an instance of KeyAgreement:

• DiffieHellman: Diffie-Hellman Key Agreement as defined in PKCS #3: Diffie-Hellman Key-Agreement Standard, RSA Laboratories, version 1.4, November 1993.

KeyGenerator

The following algorithm names can be specified when requesting an instance of KeyGenerator:

• AES

• Blowfish

• DES

• DESede

• HmacMD5

• HmacSHA1

KeyPairGenerator

The following algorithm names can be specified when requesting an instance of KeyPairGenerator:

• DiffieHellman

SecretKeyFactory

The following algorithm names can be specified when requesting an instance of SecretKeyFactory:

• AES

• DES

• DESede

• PBEWith<digest>And<encryption> or PBEWith<prf>And<encryption>: Secret-key factory for use with PKCS #5 password-based encryption, where <digest> is a message digest, <prf> is a pseudo-random function, and <encryption> is an encryption algorithm. Examples: PBEWithMD5AndDES (PKCS #5, v 1.5) and PBEWithHmacSHA1AndDESede (PKCS #5, v 2.0). Note: These both use only the low order 8 bits of each password character.

KeyFactory

The following algorithm names can be specified when requesting an instance of KeyFactory:

• DiffieHellman

AlgorithmParameterGenerator

The following algorithm names can be specified when requesting an instance of AlgorithmParameterGenerator:

• DiffieHellman

AlgorithmParameters

The following algorithm names can be specified when requesting an instance of AlgorithmParameters:

• Blowfish

• DES

• DESede

• DiffieHellman

• PBE

MAC

The following algorithm names can be specified when requesting an instance of Mac:

• HmacMD5: The HMAC-MD5 keyed-hashing algorithm as defined in RFC 2104: "HMAC: Keyed-Hashing for Message Authentication" (February 1997).

• HmacSHA1: The HMAC-SHA1 keyed-hashing algorithm as defined in RFC 2104: "HMAC: Keyed-Hashing for Message Authentication" (February 1997).

• PBEWith<mac>: MAC for use with PKCS #5 v 2.0 password-based message authentication standard, where <mac> is a Message Authentication Code algorithm name. Example: PBEWithHmacSHA1.

Keystore Types

The following types can be specified when requesting an instance of KeyStore:

• JCEKS: The proprietary keystore type implemented by the "SunJCE" provider.

Exemption Mechanisms

The following exemption mechanism names can be specified in the permission policy file that accompanies an application considered "exempt" from cryptographic restrictions:

• KeyEscrow: An encryption system with a backup decryption capability that allows authorized persons (users, officers of an organization, and government officials), under certain prescribed conditions, to decrypt ciphertext with the help of information supplied by one or more trusted parties who hold special data recovery keys.

• KeyRecovery: A method of obtaining the secret key used to lock encrypted data. One use is as a means of providing fail-safe access to a corporation's own encrypted information in times of disaster.

• KeyWeakening: A method in which a part of the key can be escrowed or recovered.

Appendix B: SunJCE Default Keysizes

The SunJCE provider uses the following default keysizes:

• KeyGenerator
  • DES: 56 bits

  • Triple DES: 112 bits

  • Blowfish: 56 bits

  • HmacMD5: 64 bytes

  • HmacSHA1: 64 bytes

• KeyPairGenerator
  • Diffie-Hellman: 1024 bits

• AlgorithmParameterGenerator
  • Diffie-Hellman: 1024 bits

Appendix C: SunJCE Keysize Restrictions

The SunJCE provider enforces the following restrictions on the keysize passed to the initialization methods of the following classes:

• KeyGenerator

  Restrictions (by algorithm):

  • DES: keysize must be equal to 56

  • Triple DES: keysize must be equal to 112 or 168

    Note: A keysize of 112 will generate a Triple DES key with 2 intermediate keys, and a keysize of 168 will generate a Triple DES key with 3 intermediate keys.

  • Blowfish: keysize must be a multiple of 8, and can only range from 32 to 448, inclusive

• KeyPairGenerator

  Restrictions (by algorithm):

  • Diffie-Hellman: keysize must be a multiple of 64, and can only range from 512 to 1024, inclusive

• AlgorithmParameterGenerator

  Restrictions (by algorithm):

  • Diffie-Hellman: keysize must be a multiple of 64, and can only range from 512 to 1024, inclusive

Appendix D: Jurisdiction Policy File Format

JCE represents its jurisdiction policy files as J2SE-style policy files with corresponding permission statements. As described in Default Policy Implementation and Policy File Syntax, a J2SE policy file specifies what permissions are allowed for code from specified code sources. A permission represents access to a system resource. In the case of JCE, the "resources" are cryptography algorithms, and code sources do not need to be specified, because the cryptographic restrictions apply to all code.

A jurisdiction policy file consists of a very basic "grant entry" containing one or more "permission entries."

grant {
    <permission entries>;
};

The format of a permission entry in a jurisdiction policy file is:

permission <crypto permission class name>[ <alg_name>
    [[, <exemption mechanism name>][, <maxKeySize>
    [, <AlgorithmParameterSpec class name>,
    <parameters for constructing an 
        AlgorithmParameterSpec object>]]]];

A sample jurisdiction policy file that includes restricting the "Blowfish" algorithm to maximum key sizes of 64 bits is:

grant {
    permission javax.crypto.CryptoPermission "Blowfish", 64;
    . . .;
};

A permission entry must begin with the word permission. The <crypto permission class name> in the template above would actually be a specific permission class name, such as javax.crypto.CryptoPermission. A crypto permission class reflects the ability of an application/applet to use certain algorithms with certain key sizes in certain environments. There are two crypto permission classes: CryptoPermission and CryptoAllPermission. The special CryptoAllPermission class implies all cryptography-related permissions, that is, it specifies that there are no cryptography-related restrictions.

The <alg_name>, when utilized, is a quoted string specifying the standard name (see Appendix A) of a cryptography algorithm, such as "DES" or "RSA".

The <exemption mechanism name>, when specified, is a quoted string indicating an exemption mechanism which, if enforced, enables a reduction in cryptographic restrictions. Exemption mechanism names that can be used include "KeyRecovery" "KeyEscrow", and "KeyWeakening".

<maxKeySize> is an integer specifying the maximum key size (in bits) allowed for the specified algorithm.

For some algorithms it may not be sufficient to specify the algorithm strength in terms of just a key size. For example, in the case of the "RC5" algorithm, the number of rounds must also be considered. For algorithms whose strength needs to be expressed as more than a key size, the permission entry should also specify an AlgorithmParameterSpec class name (such as javax.crypto.spec.RC5ParameterSpec) and a list of parameters for constructing the specified AlgorithmParameterSpec object.

Items that appear in a permission entry must appear in the specified order. An entry is terminated with a semicolon.

Case is unimportant for the identifiers (grant, permission) but is significant for the <crypto permission class name> or for any string that is passed in as a value.

Note: An "*" can be used as a wildcard for any permission entry option. For example, an "*" (without the quotes) for an <alg_name> option means "all algorithms."

Appendix E: Maximum Key Sizes Allowed by "Strong" Jurisdiction Policy Files

Due to import control restrictions, the jurisdiction policy files shipped with the Java 2 SDK, v 1.4 allow "strong" but limited cryptography to be used. Here are the maximum key sizes allowed by this "strong" version of the jurisdiction policy files:

Algorithm	Maximum Key Size
DES	64
DESede	*
RC2	128
RC4	128
RC5	128
RSA	2048
* (all others)	128

Appendix F: Sample Programs

• Diffie-Hellman Key Exchange between 2 Parties

  /*
   * Copyright 1997-2001 by Sun Microsystems, Inc.,
   * 901 San Antonio Road, Palo Alto, California, 94303, U.S.A.
   * All rights reserved.
   *
   * This software is the confidential and proprietary information
   * of Sun Microsystems, Inc. ("Confidential Information").  You
   * shall not disclose such Confidential Information and shall use
   * it only in accordance with the terms of the license agreement
   * you entered into with Sun.
   */
  
  import java.io.*;
  import java.math.BigInteger;
  import java.security.*;
  import java.security.spec.*;
  import java.security.interfaces.*;
  import javax.crypto.*;
  import javax.crypto.spec.*;
  import javax.crypto.interfaces.*;
  import com.sun.crypto.provider.SunJCE;
  
  /**
   * This program executes the Diffie-Hellman key agreement protocol
   * between 2 parties: Alice and Bob.
   *
   * By default, preconfigured parameters (1024-bit prime modulus and base
   * generator used by SKIP) are used.
   * If this program is called with the "-gen" option, a new set of
   * parameters is created.
   */
  
  public class DHKeyAgreement2 {
  
      private DHKeyAgreement2() {}
  
      public static void main(String argv[]) {
          try {
              String mode = "USE_SKIP_DH_PARAMS";
  
              DHKeyAgreement2 keyAgree = new DHKeyAgreement2();
  
              if (argv.length > 1) {
                  keyAgree.usage();
                  throw new Exception("Wrong number of command options");
              } else if (argv.length == 1) {
                  if (!(argv[0].equals("-gen"))) {
                      keyAgree.usage();
                      throw new Exception("Unrecognized flag: " + argv[0]);
                  }
                  mode = "GENERATE_DH_PARAMS";
              }
  
              keyAgree.run(mode);
          } catch (Exception e) {
              System.err.println("Error: " + e);
              System.exit(1);
          }
      }
  
      private void run(String mode) throws Exception {
  
          DHParameterSpec dhSkipParamSpec;
  
          if (mode.equals("GENERATE_DH_PARAMS")) {
              // Some central authority creates new DH parameters
              System.out.println
                  ("Creating Diffie-Hellman parameters (takes VERY long) ...");
              AlgorithmParameterGenerator paramGen
                  = AlgorithmParameterGenerator.getInstance("DH");
              paramGen.init(512);
              AlgorithmParameters params = paramGen.generateParameters();
              dhSkipParamSpec = (DHParameterSpec)params.getParameterSpec
                  (DHParameterSpec.class);
          } else {
              // use some pre-generated, default DH parameters
              System.out.println("Using SKIP Diffie-Hellman parameters");
              dhSkipParamSpec = new DHParameterSpec(skip1024Modulus,
                                                    skip1024Base);
          }
  
          /*
           * Alice creates her own DH key pair, using the DH parameters from
           * above
           */
          System.out.println("ALICE: Generate DH keypair ...");
          KeyPairGenerator aliceKpairGen = KeyPairGenerator.getInstance("DH");
          aliceKpairGen.initialize(dhSkipParamSpec);
          KeyPair aliceKpair = aliceKpairGen.generateKeyPair();
  
          // Alice creates and initializes her DH KeyAgreement object
          System.out.println("ALICE: Initialization ...");
          KeyAgreement aliceKeyAgree = KeyAgreement.getInstance("DH");
          aliceKeyAgree.init(aliceKpair.getPrivate());
  
          // Alice encodes her public key, and sends it over to Bob.
          byte[] alicePubKeyEnc = aliceKpair.getPublic().getEncoded();
  
          /*
           * Let's turn over to Bob. Bob has received Alice's public key
           * in encoded format.
           * He instantiates a DH public key from the encoded key material.
           */
          KeyFactory bobKeyFac = KeyFactory.getInstance("DH");
          X509EncodedKeySpec x509KeySpec = new X509EncodedKeySpec
              (alicePubKeyEnc);
          PublicKey alicePubKey = bobKeyFac.generatePublic(x509KeySpec);
  
          /*
           * Bob gets the DH parameters associated with Alice's public key. 
           * He must use the same parameters when he generates his own key
           * pair.
           */
          DHParameterSpec dhParamSpec = ((DHPublicKey)alicePubKey).getParams();
  
          // Bob creates his own DH key pair
          System.out.println("BOB: Generate DH keypair ...");
          KeyPairGenerator bobKpairGen = KeyPairGenerator.getInstance("DH");
          bobKpairGen.initialize(dhParamSpec);
          KeyPair bobKpair = bobKpairGen.generateKeyPair();
  
          // Bob creates and initializes his DH KeyAgreement object
          System.out.println("BOB: Initialization ...");
          KeyAgreement bobKeyAgree = KeyAgreement.getInstance("DH");
          bobKeyAgree.init(bobKpair.getPrivate());
  
          // Bob encodes his public key, and sends it over to Alice.
          byte[] bobPubKeyEnc = bobKpair.getPublic().getEncoded();
  
          /*
           * Alice uses Bob's public key for the first (and only) phase
           * of her version of the DH
           * protocol.
           * Before she can do so, she has to instanticate a DH public key
           * from Bob's encoded key material.
           */
          KeyFactory aliceKeyFac = KeyFactory.getInstance("DH");
          x509KeySpec = new X509EncodedKeySpec(bobPubKeyEnc);
          PublicKey bobPubKey = aliceKeyFac.generatePublic(x509KeySpec);
          System.out.println("ALICE: Execute PHASE1 ...");
          aliceKeyAgree.doPhase(bobPubKey, true);
  
          /*
           * Bob uses Alice's public key for the first (and only) phase
           * of his version of the DH
           * protocol.
           */
          System.out.println("BOB: Execute PHASE1 ...");
          bobKeyAgree.doPhase(alicePubKey, true);
              
          /*
           * At this stage, both Alice and Bob have completed the DH key
           * agreement protocol.
           * Both generate the (same) shared secret.
           */
          byte[] aliceSharedSecret = aliceKeyAgree.generateSecret();
          int aliceLen = aliceSharedSecret.length;
  
          byte[] bobSharedSecret = new byte[aliceLen];
          int bobLen;
          try {
              // show example of what happens if you
              // provide an output buffer that is too short
              bobLen = bobKeyAgree.generateSecret(bobSharedSecret, 1);
          } catch (ShortBufferException e) {
              System.out.println(e.getMessage());
          }
          // provide output buffer of required size
          bobLen = bobKeyAgree.generateSecret(bobSharedSecret, 0);
  
          System.out.println("Alice secret: " + 
            toHexString(aliceSharedSecret));
          System.out.println("Bob secret: " + 
            toHexString(bobSharedSecret));
  
          if (!java.util.Arrays.equals(aliceSharedSecret, bobSharedSecret))
              throw new Exception("Shared secrets differ");
          System.out.println("Shared secrets are the same");
  
          /*
           * Now let's return the shared secret as a SecretKey object
           * and use it for encryption. First, we generate SecretKeys for the
           * "DES" algorithm (based on the raw shared secret data) and
           * then we use DES in ECB mode
           * as the encryption algorithm. DES in ECB mode does not require any
           * parameters.
           *
           * Then we use DES in CBC mode, which requires an initialization
           * vector (IV) parameter. In CBC mode, you need to initialize the
           * Cipher object with an IV, which can be supplied using the
           * javax.crypto.spec.IvParameterSpec class. Note that you have to use
           * the same IV for encryption and decryption: If you use a different
           * IV for decryption than you used for encryption, decryption will
           * fail.
           *
           * Note: If you do not specify an IV when you initialize the
           * Cipher object for encryption, the underlying implementation
           * will generate a random one, which you have to retrieve using the
           * javax.crypto.Cipher.getParameters() method, which returns an 
           * instance of java.security.AlgorithmParameters. You need to transfer
           * the contents of that object (e.g., in encoded format, obtained via
           * the AlgorithmParameters.getEncoded() method) to the party who will
           * do the decryption. When initializing the Cipher for decryption,
           * the (reinstantiated) AlgorithmParameters object must be passed to
           * the Cipher.init() method.
           */
          System.out.println("Return shared secret as SecretKey object ...");
          // Bob
          // Note: The call to bobKeyAgree.generateSecret above reset the key
          // agreement object, so we call doPhase again prior to another
          // generateSecret call
          bobKeyAgree.doPhase(alicePubKey, true);
          SecretKey bobDesKey = bobKeyAgree.generateSecret("DES");
  
          // Alice
          // Note: The call to aliceKeyAgree.generateSecret above reset the key
          // agreement object, so we call doPhase again prior to another
          // generateSecret call
          aliceKeyAgree.doPhase(bobPubKey, true);
          SecretKey aliceDesKey = aliceKeyAgree.generateSecret("DES");
  
          /*
           * Bob encrypts, using DES in ECB mode
           */
          Cipher bobCipher = Cipher.getInstance("DES/ECB/PKCS5Padding");
          bobCipher.init(Cipher.ENCRYPT_MODE, bobDesKey);
  
          byte[] cleartext = "This is just an example".getBytes();
          byte[] ciphertext = bobCipher.doFinal(cleartext);
  
          /*
           * Alice decrypts, using DES in ECB mode
           */
          Cipher aliceCipher = Cipher.getInstance("DES/ECB/PKCS5Padding");
          aliceCipher.init(Cipher.DECRYPT_MODE, aliceDesKey);
          byte[] recovered = aliceCipher.doFinal(ciphertext);
              
          if (!java.util.Arrays.equals(cleartext, recovered))
              throw new Exception("DES in CBC mode recovered text is " +
                "different from cleartext");
          System.out.println("DES in ECB mode recovered text is " +
              "same as cleartext");    
  
          /*
           * Bob encrypts, using DES in CBC mode
           */
          bobCipher = Cipher.getInstance("DES/CBC/PKCS5Padding");
          bobCipher.init(Cipher.ENCRYPT_MODE, bobDesKey);
  
          cleartext = "This is just an example".getBytes();
          ciphertext = bobCipher.doFinal(cleartext);
          // Retrieve the parameter that was used, and transfer it to Alice in
          // encoded format
          byte[] encodedParams = bobCipher.getParameters().getEncoded();
  
          /*
           * Alice decrypts, using DES in CBC mode
           */
          // Instantiate AlgorithmParameters object from parameter encoding
          // obtained from Bob
          AlgorithmParameters params = AlgorithmParameters.getInstance("DES");
          params.init(encodedParams);
          aliceCipher = Cipher.getInstance("DES/CBC/PKCS5Padding");
          aliceCipher.init(Cipher.DECRYPT_MODE, aliceDesKey, params);
          recovered = aliceCipher.doFinal(ciphertext);
              
          if (!java.util.Arrays.equals(cleartext, recovered))
              throw new Exception("DES in CBC mode recovered text is " +
                "different from cleartext");
          System.out.println("DES in CBC mode recovered text is " +
              "same as cleartext");    
      }
  
      /*
       * Converts a byte to hex digit and writes to the supplied buffer
       */
      private void byte2hex(byte b, StringBuffer buf) {
          char[] hexChars = { '0', '1', '2', '3', '4', '5', '6', '7', '8',
                              '9', 'A', 'B', 'C', 'D', 'E', 'F' };
          int high = ((b & 0xf0) >> 4);
          int low = (b & 0x0f);
          buf.append(hexChars[high]);
          buf.append(hexChars[low]);
      }
  
      /*
       * Converts a byte array to hex string
       */
      private String toHexString(byte[] block) {
          StringBuffer buf = new StringBuffer();
  
          int len = block.length;
  
          for (int i = 0; i < len; i++) {
               byte2hex(block[i], buf);
               if (i < len-1) {
                   buf.append(":");
               }
          } 
          return buf.toString();
      }
  
      /*
       * Prints the usage of this test.
       */
      private void usage() {
          System.err.print("DHKeyAgreement usage: ");
          System.err.println("[-gen]");
      }
  
      // The 1024 bit Diffie-Hellman modulus values used by SKIP
      private static final byte skip1024ModulusBytes[] = {
          (byte)0xF4, (byte)0x88, (byte)0xFD, (byte)0x58,
          (byte)0x4E, (byte)0x49, (byte)0xDB, (byte)0xCD,
          (byte)0x20, (byte)0xB4, (byte)0x9D, (byte)0xE4,
          (byte)0x91, (byte)0x07, (byte)0x36, (byte)0x6B,
          (byte)0x33, (byte)0x6C, (byte)0x38, (byte)0x0D,
          (byte)0x45, (byte)0x1D, (byte)0x0F, (byte)0x7C,
          (byte)0x88, (byte)0xB3, (byte)0x1C, (byte)0x7C,
          (byte)0x5B, (byte)0x2D, (byte)0x8E, (byte)0xF6,
          (byte)0xF3, (byte)0xC9, (byte)0x23, (byte)0xC0,
          (byte)0x43, (byte)0xF0, (byte)0xA5, (byte)0x5B,
          (byte)0x18, (byte)0x8D, (byte)0x8E, (byte)0xBB,
          (byte)0x55, (byte)0x8C, (byte)0xB8, (byte)0x5D,
          (byte)0x38, (byte)0xD3, (byte)0x34, (byte)0xFD,
          (byte)0x7C, (byte)0x17, (byte)0x57, (byte)0x43,
          (byte)0xA3, (byte)0x1D, (byte)0x18, (byte)0x6C,
          (byte)0xDE, (byte)0x33, (byte)0x21, (byte)0x2C,
          (byte)0xB5, (byte)0x2A, (byte)0xFF, (byte)0x3C,
          (byte)0xE1, (byte)0xB1, (byte)0x29, (byte)0x40,
          (byte)0x18, (byte)0x11, (byte)0x8D, (byte)0x7C,
          (byte)0x84, (byte)0xA7, (byte)0x0A, (byte)0x72,
          (byte)0xD6, (byte)0x86, (byte)0xC4, (byte)0x03,
          (byte)0x19, (byte)0xC8, (byte)0x07, (byte)0x29,
          (byte)0x7A, (byte)0xCA, (byte)0x95, (byte)0x0C,
          (byte)0xD9, (byte)0x96, (byte)0x9F, (byte)0xAB,
          (byte)0xD0, (byte)0x0A, (byte)0x50, (byte)0x9B,
          (byte)0x02, (byte)0x46, (byte)0xD3, (byte)0x08,
          (byte)0x3D, (byte)0x66, (byte)0xA4, (byte)0x5D,
          (byte)0x41, (byte)0x9F, (byte)0x9C, (byte)0x7C,
          (byte)0xBD, (byte)0x89, (byte)0x4B, (byte)0x22,
          (byte)0x19, (byte)0x26, (byte)0xBA, (byte)0xAB,
          (byte)0xA2, (byte)0x5E, (byte)0xC3, (byte)0x55,
          (byte)0xE9, (byte)0x2F, (byte)0x78, (byte)0xC7
      };
  
      // The SKIP 1024 bit modulus
      private static final BigInteger skip1024Modulus
      = new BigInteger(1, skip1024ModulusBytes);
  
      // The base used with the SKIP 1024 bit modulus
      private static final BigInteger skip1024Base = BigInteger.valueOf(2);
  }
  

  ---

• Diffie-Hellman Key Exchange between 3 Parties

  /*
   * Copyright 1997-2001 by Sun Microsystems, Inc.,
   * 901 San Antonio Road, Palo Alto, California, 94303, U.S.A.
   * All rights reserved.
   *
   * This software is the confidential and proprietary information
   * of Sun Microsystems, Inc. ("Confidential Information").  You
   * shall not disclose such Confidential Information and shall use
   * it only in accordance with the terms of the license agreement
   * you entered into with Sun.
   */
  
  import java.io.*;
  import java.math.BigInteger;
  import java.security.*;
  import java.security.spec.*;
  import java.security.interfaces.*;
  import javax.crypto.*;
  import javax.crypto.spec.*;
  import javax.crypto.interfaces.*;
  import com.sun.crypto.provider.SunJCE;
  
  /**
   * This program executes the Diffie-Hellman key agreement protocol
   * between 3 parties: Alice, Bob, and Carol.
   *
   * We use the same 1024-bit prime modulus and base generator that are 
   * used by SKIP.
   */
  
  public class DHKeyAgreement3 {
  
      private DHKeyAgreement3() {}
  
      public static void main(String argv[]) {
          try {
              DHKeyAgreement3 keyAgree = new DHKeyAgreement3();
              keyAgree.run();
          } catch (Exception e) {
              System.err.println("Error: " + e);
              System.exit(1);
          }
      }
  
      private void run() throws Exception {
  
          DHParameterSpec dhSkipParamSpec;
  
          System.out.println("Using SKIP Diffie-Hellman parameters");
          dhSkipParamSpec = new DHParameterSpec(skip1024Modulus, skip1024Base);
  
          // Alice creates her own DH key pair
          System.out.println("ALICE: Generate DH keypair ...");
          KeyPairGenerator aliceKpairGen = KeyPairGenerator.getInstance("DH");
          aliceKpairGen.initialize(dhSkipParamSpec);
          KeyPair aliceKpair = aliceKpairGen.generateKeyPair();
  
          // Bob creates his own DH key pair
          System.out.println("BOB: Generate DH keypair ...");
          KeyPairGenerator bobKpairGen = KeyPairGenerator.getInstance("DH");
          bobKpairGen.initialize(dhSkipParamSpec);
          KeyPair bobKpair = bobKpairGen.generateKeyPair();
  
          // Carol creates her own DH key pair
          System.out.println("CAROL: Generate DH keypair ...");
          KeyPairGenerator carolKpairGen = KeyPairGenerator.getInstance("DH");
          carolKpairGen.initialize(dhSkipParamSpec);
          KeyPair carolKpair = carolKpairGen.generateKeyPair();
  
  
          // Alice initialize
          System.out.println("ALICE: Initialize ...");
          KeyAgreement aliceKeyAgree = KeyAgreement.getInstance("DH");
          aliceKeyAgree.init(aliceKpair.getPrivate());
  
          // Bob initialize
          System.out.println("BOB: Initialize ...");
          KeyAgreement bobKeyAgree = KeyAgreement.getInstance("DH");
          bobKeyAgree.init(bobKpair.getPrivate());
  
          // Carol initialize
          System.out.println("CAROL: Initialize ...");
          KeyAgreement carolKeyAgree = KeyAgreement.getInstance("DH");
          carolKeyAgree.init(carolKpair.getPrivate());
  
  
          // Alice uses Carol's public key
          Key ac = aliceKeyAgree.doPhase(carolKpair.getPublic(), false);
  
          // Bob uses Alice's public key
          Key ba = bobKeyAgree.doPhase(aliceKpair.getPublic(), false);
  
          // Carol uses Bob's public key
          Key cb = carolKeyAgree.doPhase(bobKpair.getPublic(), false);
  
  
          // Alice uses Carol's result from above
          aliceKeyAgree.doPhase(cb, true);
  
          // Bob uses Alice's result from above
          bobKeyAgree.doPhase(ac, true);
  
          // Carol uses Bob's result from above
          carolKeyAgree.doPhase(ba, true);
  
  
          // Alice, Bob and Carol compute their secrets
          byte[] aliceSharedSecret = aliceKeyAgree.generateSecret();
          System.out.println("Alice secret: " + toHexString(aliceSharedSecret));
  
          byte[] bobSharedSecret = bobKeyAgree.generateSecret();
          System.out.println("Bob secret: " + toHexString(bobSharedSecret));
  
          byte[] carolSharedSecret = carolKeyAgree.generateSecret();
          System.out.println("Carol secret: " + toHexString(carolSharedSecret));
  
  
          // Compare Alice and Bob
          if (!java.util.Arrays.equals(aliceSharedSecret, bobSharedSecret))
              throw new Exception("Alice and Bob differ");
          System.out.println("Alice and Bob are the same");
  
          // Compare Bob and Carol
          if (!java.util.Arrays.equals(bobSharedSecret, carolSharedSecret))
              throw new Exception("Bob and Carol differ");
          System.out.println("Bob and Carol are the same");
      }
  
  
      /*
       * Converts a byte to hex digit and writes to the supplied buffer
       */
      private void byte2hex(byte b, StringBuffer buf) {
          char[] hexChars = { '0', '1', '2', '3', '4', '5', '6', '7', '8',
                              '9', 'A', 'B', 'C', 'D', 'E', 'F' };
          int high = ((b & 0xf0) >> 4);
          int low = (b & 0x0f);
          buf.append(hexChars[high]);
          buf.append(hexChars[low]);
      }
  
      /*
       * Converts a byte array to hex string
       */
      private String toHexString(byte[] block) {
          StringBuffer buf = new StringBuffer();
  
          int len = block.length;
  
          for (int i = 0; i < len; i++) {
               byte2hex(block[i], buf);
               if (i < len-1) {
                   buf.append(":");
               }
          } 
          return buf.toString();
      }
  
      /*
       * Prints the usage of this test.
       */
      private void usage() {
          System.err.print("DHKeyAgreement usage: ");
          System.err.println("[-gen]");
      }
  
      // The 1024 bit Diffie-Hellman modulus values used by SKIP
      private static final byte skip1024ModulusBytes[] = {
          (byte)0xF4, (byte)0x88, (byte)0xFD, (byte)0x58,
          (byte)0x4E, (byte)0x49, (byte)0xDB, (byte)0xCD,
          (byte)0x20, (byte)0xB4, (byte)0x9D, (byte)0xE4,
          (byte)0x91, (byte)0x07, (byte)0x36, (byte)0x6B,
          (byte)0x33, (byte)0x6C, (byte)0x38, (byte)0x0D,
          (byte)0x45, (byte)0x1D, (byte)0x0F, (byte)0x7C,
          (byte)0x88, (byte)0xB3, (byte)0x1C, (byte)0x7C,
          (byte)0x5B, (byte)0x2D, (byte)0x8E, (byte)0xF6,
          (byte)0xF3, (byte)0xC9, (byte)0x23, (byte)0xC0,
          (byte)0x43, (byte)0xF0, (byte)0xA5, (byte)0x5B,
          (byte)0x18, (byte)0x8D, (byte)0x8E, (byte)0xBB,
          (byte)0x55, (byte)0x8C, (byte)0xB8, (byte)0x5D,
          (byte)0x38, (byte)0xD3, (byte)0x34, (byte)0xFD,
          (byte)0x7C, (byte)0x17, (byte)0x57, (byte)0x43,
          (byte)0xA3, (byte)0x1D, (byte)0x18, (byte)0x6C,
          (byte)0xDE, (byte)0x33, (byte)0x21, (byte)0x2C,
          (byte)0xB5, (byte)0x2A, (byte)0xFF, (byte)0x3C,
          (byte)0xE1, (byte)0xB1, (byte)0x29, (byte)0x40,
          (byte)0x18, (byte)0x11, (byte)0x8D, (byte)0x7C,
          (byte)0x84, (byte)0xA7, (byte)0x0A, (byte)0x72,
          (byte)0xD6, (byte)0x86, (byte)0xC4, (byte)0x03,
          (byte)0x19, (byte)0xC8, (byte)0x07, (byte)0x29,
          (byte)0x7A, (byte)0xCA, (byte)0x95, (byte)0x0C,
          (byte)0xD9, (byte)0x96, (byte)0x9F, (byte)0xAB,
          (byte)0xD0, (byte)0x0A, (byte)0x50, (byte)0x9B,
          (byte)0x02, (byte)0x46, (byte)0xD3, (byte)0x08,
          (byte)0x3D, (byte)0x66, (byte)0xA4, (byte)0x5D,
          (byte)0x41, (byte)0x9F, (byte)0x9C, (byte)0x7C,
          (byte)0xBD, (byte)0x89, (byte)0x4B, (byte)0x22,
          (byte)0x19, (byte)0x26, (byte)0xBA, (byte)0xAB,
          (byte)0xA2, (byte)0x5E, (byte)0xC3, (byte)0x55,
          (byte)0xE9, (byte)0x2F, (byte)0x78, (byte)0xC7
      };
  
      // The SKIP 1024 bit modulus
      private static final BigInteger skip1024Modulus
      = new BigInteger(1, skip1024ModulusBytes);
  
      // The base used with the SKIP 1024 bit modulus
      private static final BigInteger skip1024Base = BigInteger.valueOf(2);
  }
  

  ---

• Blowfish Example

  /*
   * Copyright 1997-2001 by Sun Microsystems, Inc.,
   * 901 San Antonio Road, Palo Alto, California, 94303, U.S.A.
   * All rights reserved.
   *
   * This software is the confidential and proprietary information
   * of Sun Microsystems, Inc. ("Confidential Information").  You
   * shall not disclose such Confidential Information and shall use
   * it only in accordance with the terms of the license agreement
   * you entered into with Sun.
   */
  
  import java.security.*;
  import javax.crypto.*;
  import javax.crypto.spec.*;
  
  /**
   * This program generates a Blowfish key, retrieves its raw bytes, and 
   * then reinstantiates a Blowfish key from the key bytes.
   * The reinstantiated key is used to initialize a Blowfish cipher for
   * encryption.
   */
  
  public class BlowfishKey {
  
      public static void main(String[] args) throws Exception {
  
          KeyGenerator kgen = KeyGenerator.getInstance("Blowfish");
          SecretKey skey = kgen.generateKey();
          byte[] raw = skey.getEncoded();
          SecretKeySpec skeySpec = new SecretKeySpec(raw, "Blowfish");
  
          Cipher cipher = Cipher.getInstance("Blowfish");
          cipher.init(Cipher.ENCRYPT_MODE, skeySpec);
          byte[] encrypted = 
              cipher.doFinal("This is just an example".getBytes());
      }
  }
  

  ---

• HMAC-MD5 Example

  /*
   * Copyright 1997-2001 by Sun Microsystems, Inc.,
   * 901 San Antonio Road, Palo Alto, California, 94303, U.S.A.
   * All rights reserved.
   *
   * This software is the confidential and proprietary information
   * of Sun Microsystems, Inc. ("Confidential Information").  You
   * shall not disclose such Confidential Information and shall use
   * it only in accordance with the terms of the license agreement
   * you entered into with Sun.
   */
  
  import java.security.*;
  import javax.crypto.*;
  
  /**
   * This program demonstrates how to generate a secret-key object for
   * HMAC-MD5, and initialize an HMAC-MD5 object with it.
   */
  
  public class initMac {
  
      public static void main(String[] args) throws Exception {
  
          // Generate secret key for HMAC-MD5
          KeyGenerator kg = KeyGenerator.getInstance("HmacMD5");
          SecretKey sk = kg.generateKey();
  
          // Get instance of Mac object implementing HMAC-MD5, and 
          // initialize it with the above secret key
          Mac mac = Mac.getInstance("HmacMD5");
          mac.init(sk);
          byte[] result = mac.doFinal("Hi There".getBytes());
      }
  }
  

Copyright © 1996-2002 Sun Microsystems, Inc. All Rights Reserved. Please send comments to: java-security@java.sun.com.

Java Software