java.util.concurrent.locks
Class ReentrantReadWriteLock

java.lang.Object
  java.util.concurrent.locks.ReentrantReadWriteLock

All Implemented Interfaces:

Serializable, ReadWriteLock

public class ReentrantReadWriteLock
extends Object
implements ReadWriteLock, Serializable

An implementation of ReadWriteLock supporting similar semantics to ReentrantLock.

This class has the following properties:

• Acquisition order

  This class does not impose a reader or writer preference ordering for lock access. However, it does support an optional fairness policy. When constructed as fair, threads contend for entry using an approximately arrival-order policy. When the write lock is released either the longest-waiting single writer will be assigned the write lock, or if there is a reader waiting longer than any writer, the set of readers will be assigned the read lock. When constructed as non-fair, the order of entry to the lock need not be in arrival order. In either case, if readers are active and a writer enters the lock then no subsequent readers will be granted the read lock until after that writer has acquired and released the write lock.

• Reentrancy

  This lock allows both readers and writers to reacquire read or write locks in the style of a ReentrantLock. Readers are not allowed until all write locks held by the writing thread have been released.

  Additionally, a writer can acquire the read lock - but not vice-versa. Among other applications, reentrancy can be useful when write locks are held during calls or callbacks to methods that perform reads under read locks. If a reader tries to acquire the write lock it will never succeed.

• Lock downgrading

  Reentrancy also allows downgrading from the write lock to a read lock, by acquiring the write lock, then the read lock and then releasing the write lock. However, upgrading from a read lock to the write lock is not possible.

• Interruption of lock acquisition

  The read lock and write lock both support interruption during lock acquisition.

• Condition support

  The write lock provides a Condition implementation that behaves in the same way, with respect to the write lock, as the Condition implementation provided by ReentrantLock.newCondition() does for ReentrantLock. This Condition can, of course, only be used with the write lock.

  The read lock does not support a Condition and readLock().newCondition() throws UnsupportedOperationException.

• Instrumentation

  This class supports methods to determine whether locks are held or contended. These methods are designed for monitoring system state, not for synchronization control.

Serialization of this class behaves in the same way as built-in locks: a deserialized lock is in the unlocked state, regardless of its state when serialized.

Sample usages. Here is a code sketch showing how to exploit reentrancy to perform lock downgrading after updating a cache (exception handling is elided for simplicity):

 class CachedData {
   Object data;
   volatile boolean cacheValid;
   ReentrantReadWriteLock rwl = new ReentrantReadWriteLock();

   void processCachedData() {
     rwl.readLock().lock();
     if (!cacheValid) {
        // upgrade lock manually
        rwl.readLock().unlock();   // must unlock first to obtain writelock
        rwl.writeLock().lock();
        if (!cacheValid) { // recheck
          data = ...
          cacheValid = true;
        }
        // downgrade lock
        rwl.readLock().lock();  // reacquire read without giving up write lock
        rwl.writeLock().unlock(); // unlock write, still hold read
     }

     use(data);
     rwl.readLock().unlock();
   }
 }
 

 class RWDictionary {
    private final Map<String, Data>  m = new TreeMap<String, Data>();
    private final ReentrantReadWriteLock rwl = new ReentrantReadWriteLock();
    private final Lock r = rwl.readLock();
    private final Lock w = rwl.writeLock();

    public Data get(String key) {
        r.lock(); try { return m.get(key); } finally { r.unlock(); }
    }
    public String[] allKeys() {
        r.lock(); try { return m.keySet().toArray(); } finally { r.unlock(); }
    }
    public Data put(String key, Data value) {
        w.lock(); try { return m.put(key, value); } finally { w.unlock(); }
    }
    public void clear() {
        w.lock(); try { m.clear(); } finally { w.unlock(); }
    }
 }
 

Implementation Notes

A reentrant write lock intrinsically defines an owner and can only be released by the thread that acquired it. In contrast, in this implementation, the read lock has no concept of ownership, and there is no requirement that the thread releasing a read lock is the same as the one that acquired it. However, this property is not guaranteed to hold in future implementations of this class.

This lock supports a maximum of 65536 recursive write locks and 65536 read locks. Attempts to exceed these limits result in Error throws from locking methods.

Since:

1.5

See Also:

Serialized Form

Nested Class Summary
static class	ReentrantReadWriteLock.ReadLock           The lock returned by method readLock().
static class	ReentrantReadWriteLock.WriteLock           The lock returned by method writeLock().

 

Constructor Summary
ReentrantReadWriteLock()           Creates a new ReentrantReadWriteLock with default ordering properties.
ReentrantReadWriteLock(boolean fair)           Creates a new ReentrantReadWriteLock with the given fairness policy.

 

Method Summary
protected  Thread	getOwner()           Returns the thread that currently owns the write lock, or null if not owned.
protected  Collection<Thread>	getQueuedReaderThreads()           Returns a collection containing threads that may be waiting to acquire the read lock.
protected  Collection<Thread>	getQueuedThreads()           Returns a collection containing threads that may be waiting to acquire either the read or write lock.
protected  Collection<Thread>	getQueuedWriterThreads()           Returns a collection containing threads that may be waiting to acquire the write lock.
int	getQueueLength()           Returns an estimate of the number of threads waiting to acquire either the read or write lock.
int	getReadLockCount()           Queries the number of read locks held for this lock.
protected  Collection<Thread>	getWaitingThreads(Condition condition)           Returns a collection containing those threads that may be waiting on the given condition associated with the write lock.
int	getWaitQueueLength(Condition condition)           Returns an estimate of the number of threads waiting on the given condition associated with the write lock.
int	getWriteHoldCount()           Queries the number of reentrant write holds on this lock by the current thread.
boolean	hasQueuedThread(Thread thread)           Queries whether the given thread is waiting to acquire either the read or write lock.
boolean	hasQueuedThreads()           Queries whether any threads are waiting to acquire the read or write lock.
boolean	hasWaiters(Condition condition)           Queries whether any threads are waiting on the given condition associated with the write lock.
boolean	isFair()           Returns true if this lock has fairness set true.
boolean	isWriteLocked()           Queries if the write lock is held by any thread.
boolean	isWriteLockedByCurrentThread()           Queries if the write lock is held by the current thread.
ReentrantReadWriteLock.ReadLock	readLock()           Returns the lock used for reading.
String	toString()           Returns a string identifying this lock, as well as its lock state.
ReentrantReadWriteLock.WriteLock	writeLock()           Returns the lock used for writing.

 

Methods inherited from class java.lang.Object
clone, equals, finalize, getClass, hashCode, notify, notifyAll, wait, wait, wait

 

Constructor Detail

ReentrantReadWriteLock

public ReentrantReadWriteLock()

Creates a new ReentrantReadWriteLock with default ordering properties.

ReentrantReadWriteLock

public ReentrantReadWriteLock(boolean fair)

Creates a new ReentrantReadWriteLock with the given fairness policy.

Parameters:

fair - true if this lock should use a fair ordering policy

writeLock

public ReentrantReadWriteLock.WriteLock writeLock()

Description copied from interface: ReadWriteLock

Returns the lock used for writing.

Specified by:

writeLock in interface ReadWriteLock

Returns:

the lock used for writing.

readLock

public ReentrantReadWriteLock.ReadLock readLock()

Description copied from interface: ReadWriteLock

Returns the lock used for reading.

Specified by:

readLock in interface ReadWriteLock

Returns:

the lock used for reading.

isFair

public final boolean isFair()

Returns true if this lock has fairness set true.

Returns:

true if this lock has fairness set true.

getOwner

protected Thread getOwner()

Returns the thread that currently owns the write lock, or null if not owned. Note that the owner may be momentarily null even if there are threads trying to acquire the lock but have not yet done so. This method is designed to facilitate construction of subclasses that provide more extensive lock monitoring facilities.

Returns:

the owner, or null if not owned.

getReadLockCount

public int getReadLockCount()

Queries the number of read locks held for this lock. This method is designed for use in monitoring system state, not for synchronization control.

Returns:

the number of read locks held.

isWriteLocked

public boolean isWriteLocked()

Queries if the write lock is held by any thread. This method is designed for use in monitoring system state, not for synchronization control.

Returns:

true if any thread holds the write lock and false otherwise.

isWriteLockedByCurrentThread

public boolean isWriteLockedByCurrentThread()

Queries if the write lock is held by the current thread.

Returns:

true if the current thread holds the write lock and false otherwise.

getWriteHoldCount

public int getWriteHoldCount()

Queries the number of reentrant write holds on this lock by the current thread. A writer thread has a hold on a lock for each lock action that is not matched by an unlock action.

Returns:

the number of holds on the write lock by the current thread, or zero if the write lock is not held by the current thread.

getQueuedWriterThreads

protected Collection<Thread> getQueuedWriterThreads()

Returns a collection containing threads that may be waiting to acquire the write lock. Because the actual set of threads may change dynamically while constructing this result, the returned collection is only a best-effort estimate. The elements of the returned collection are in no particular order. This method is designed to facilitate construction of subclasses that provide more extensive lock monitoring facilities.

Returns:

the collection of threads

getQueuedReaderThreads

protected Collection<Thread> getQueuedReaderThreads()

Returns a collection containing threads that may be waiting to acquire the read lock. Because the actual set of threads may change dynamically while constructing this result, the returned collection is only a best-effort estimate. The elements of the returned collection are in no particular order. This method is designed to facilitate construction of subclasses that provide more extensive lock monitoring facilities.

Returns:

the collection of threads

hasQueuedThreads

public final boolean hasQueuedThreads()

Queries whether any threads are waiting to acquire the read or write lock. Note that because cancellations may occur at any time, a true return does not guarantee that any other thread will ever acquire a lock. This method is designed primarily for use in monitoring of the system state.

Returns:

true if there may be other threads waiting to acquire the lock.

hasQueuedThread

public final boolean hasQueuedThread(Thread thread)

Queries whether the given thread is waiting to acquire either the read or write lock. Note that because cancellations may occur at any time, a true return does not guarantee that this thread will ever acquire a lock. This method is designed primarily for use in monitoring of the system state.

Parameters:

thread - the thread

Returns:

true if the given thread is queued waiting for this lock.

Throws:

NullPointerException - if thread is null

getQueueLength

public final int getQueueLength()

Returns an estimate of the number of threads waiting to acquire either the read or write lock. The value is only an estimate because the number of threads may change dynamically while this method traverses internal data structures. This method is designed for use in monitoring of the system state, not for synchronization control.

Returns:

the estimated number of threads waiting for this lock

getQueuedThreads

protected Collection<Thread> getQueuedThreads()

Returns a collection containing threads that may be waiting to acquire either the read or write lock. Because the actual set of threads may change dynamically while constructing this result, the returned collection is only a best-effort estimate. The elements of the returned collection are in no particular order. This method is designed to facilitate construction of subclasses that provide more extensive monitoring facilities.

Returns:

the collection of threads

hasWaiters

public boolean hasWaiters(Condition condition)

Queries whether any threads are waiting on the given condition associated with the write lock. Note that because timeouts and interrupts may occur at any time, a true return does not guarantee that a future signal will awaken any threads. This method is designed primarily for use in monitoring of the system state.

Parameters:

condition - the condition

Returns:

true if there are any waiting threads.

Throws:

IllegalMonitorStateException - if this lock is not held

IllegalArgumentException - if the given condition is not associated with this lock

NullPointerException - if condition null

getWaitQueueLength

public int getWaitQueueLength(Condition condition)

Returns an estimate of the number of threads waiting on the given condition associated with the write lock. Note that because timeouts and interrupts may occur at any time, the estimate serves only as an upper bound on the actual number of waiters. This method is designed for use in monitoring of the system state, not for synchronization control.

Parameters:

condition - the condition

Returns:

the estimated number of waiting threads.

Throws:

IllegalMonitorStateException - if this lock is not held

IllegalArgumentException - if the given condition is not associated with this lock

NullPointerException - if condition null

getWaitingThreads

protected Collection<Thread> getWaitingThreads(Condition condition)

Returns a collection containing those threads that may be waiting on the given condition associated with the write lock. Because the actual set of threads may change dynamically while constructing this result, the returned collection is only a best-effort estimate. The elements of the returned collection are in no particular order. This method is designed to facilitate construction of subclasses that provide more extensive condition monitoring facilities.

Parameters:

condition - the condition

Returns:

the collection of threads

Throws:

IllegalMonitorStateException - if this lock is not held

IllegalArgumentException - if the given condition is not associated with this lock

NullPointerException - if condition null

toString

public String toString()

Returns a string identifying this lock, as well as its lock state. The state, in brackets, includes the String "Write locks =" followed by the number of reentrantly held write locks, and the String "Read locks =" followed by the number of held read locks.

Overrides:

toString in class Object

Returns:

a string identifying this lock, as well as its lock state.