javax.swing.text
Class JTextComponent

java.lang.Object
  java.awt.Component
      java.awt.Container
          javax.swing.JComponent
              javax.swing.text.JTextComponent

All Implemented Interfaces:

ImageObserver, MenuContainer, Serializable, Accessible, Scrollable

Direct Known Subclasses:

JEditorPane, JTextArea, JTextField

public abstract class JTextComponent
extends JComponent
implements Scrollable, Accessible

JTextComponent is the base class for swing text components. It tries to be compatible with the java.awt.TextComponent class where it can reasonably do so. Also provided are other services for additional flexibility (beyond the pluggable UI and bean support). You can find information on how to use the functionality this class provides in General Rules for Using Text Components, a section in The Java Tutorial.

Caret Changes

The caret is a pluggable object in swing text components. Notification of changes to the caret position and the selection are sent to implementations of the CaretListener interface that have been registered with the text component. The UI will install a default caret unless a customized caret has been set.
By default the caret tracks all the document changes performed on the Event Dispatching Thread and updates it's position accordingly if an insertion occurs before or at the caret position or a removal occurs before the caret position. DefaultCaret tries to make itself visible which may lead to scrolling of a text component within JScrollPane. The default caret behavior can be changed by the DefaultCaret.setUpdatePolicy(int) method.
Note: Non-editable text components also have a caret though it may not be painted.

Commands

Text components provide a number of commands that can be used to manipulate the component. This is essentially the way that the component expresses its capabilities. These are expressed in terms of the swing Action interface, using the TextAction implementation. The set of commands supported by the text component can be found with the getActions() method. These actions can be bound to key events, fired from buttons, etc.

Text Input

The text components support flexible and internationalized text input, using keymaps and the input method framework, while maintaining compatibility with the AWT listener model.

A Keymap lets an application bind key strokes to actions. In order to allow keymaps to be shared across multiple text components, they can use actions that extend TextAction. TextAction can determine which JTextComponent most recently has or had focus and therefore is the subject of the action (In the case that the ActionEvent sent to the action doesn't contain the target text component as its source).

The input method framework lets text components interact with input methods, separate software components that preprocess events to let users enter thousands of different characters using keyboards with far fewer keys. JTextComponent is an active client of the framework, so it implements the preferred user interface for interacting with input methods. As a consequence, some key events do not reach the text component because they are handled by an input method, and some text input reaches the text component as committed text within an InputMethodEvent instead of as a key event. The complete text input is the combination of the characters in keyTyped key events and committed text in input method events.

The AWT listener model lets applications attach event listeners to components in order to bind events to actions. Swing encourages the use of keymaps instead of listeners, but maintains compatibility with listeners by giving the listeners a chance to steal an event by consuming it.

Keyboard event and input method events are handled in the following stages, with each stage capable of consuming the event:

Stage	KeyEvent	InputMethodEvent
1.	input methods	(generated here)
2.	focus manager
3.	registered key listeners	registered input method listeners
4.		input method handling in JTextComponent
5.	keymap handling using the current keymap
6.	keyboard handling in JComponent (e.g. accelerators, component navigation, etc.)

To maintain compatibility with applications that listen to key events but are not aware of input method events, the input method handling in stage 4 provides a compatibility mode for components that do not process input method events. For these components, the committed text is converted to keyTyped key events and processed in the key event pipeline starting at stage 3 instead of in the input method event pipeline.

By default the component will create a keymap (named DEFAULT_KEYMAP) that is shared by all JTextComponent instances as the default keymap. Typically a look-and-feel implementation will install a different keymap that resolves to the default keymap for those bindings not found in the different keymap. The minimal bindings include:

• inserting content into the editor for the printable keys.
• removing content with the backspace and del keys.
• caret movement forward and backward

Model/View Split

The text components have a model-view split. A text component pulls together the objects used to represent the model, view, and controller. The text document model may be shared by other views which act as observers of the model (e.g. a document may be shared by multiple components).

The model is defined by the Document interface. This is intended to provide a flexible text storage mechanism that tracks change during edits and can be extended to more sophisticated models. The model interfaces are meant to capture the capabilities of expression given by SGML, a system used to express a wide variety of content. Each modification to the document causes notification of the details of the change to be sent to all observers in the form of a DocumentEvent which allows the views to stay up to date with the model. This event is sent to observers that have implemented the DocumentListener interface and registered interest with the model being observed.

Location Information

The capability of determining the location of text in the view is provided. There are two methods, modelToView(int) and viewToModel(java.awt.Point) for determining this information.

Undo/Redo support

Support for an edit history mechanism is provided to allow undo/redo operations. The text component does not itself provide the history buffer by default, but does provide the UndoableEdit records that can be used in conjunction with a history buffer to provide the undo/redo support. The support is provided by the Document model, which allows one to attach UndoableEditListener implementations.

Thread Safety

The swing text components provide some support of thread safe operations. Because of the high level of configurability of the text components, it is possible to circumvent the protection provided. The protection primarily comes from the model, so the documentation of AbstractDocument describes the assumptions of the protection provided. The methods that are safe to call asynchronously are marked with comments.

Newlines

For a discussion on how newlines are handled, see DefaultEditorKit.

Warning: Serialized objects of this class will not be compatible with future Swing releases. The current serialization support is appropriate for short term storage or RMI between applications running the same version of Swing. As of 1.4, support for long term storage of all JavaBeans^TM has been added to the java.beans package. Please see XMLEncoder.

See Also:

Document, DocumentEvent, DocumentListener, Caret, CaretEvent, CaretListener, TextUI, View, ViewFactory

Nested Class Summary
class	JTextComponent.AccessibleJTextComponent           This class implements accessibility support for the JTextComponent class.
static class	JTextComponent.KeyBinding           Binding record for creating key bindings.

 

Nested classes/interfaces inherited from class javax.swing.JComponent
JComponent.AccessibleJComponent

 

Nested classes/interfaces inherited from class java.awt.Container
Container.AccessibleAWTContainer

 

Nested classes/interfaces inherited from class java.awt.Component
Component.AccessibleAWTComponent, Component.BltBufferStrategy, Component.FlipBufferStrategy

 

Field Summary
static String	DEFAULT_KEYMAP           The default keymap that will be shared by all JTextComponent instances unless they have had a different keymap set.
static String	FOCUS_ACCELERATOR_KEY           The bound property name for the focus accelerator.

 

Fields inherited from class javax.swing.JComponent
accessibleContext, listenerList, TOOL_TIP_TEXT_KEY, ui, UNDEFINED_CONDITION, WHEN_ANCESTOR_OF_FOCUSED_COMPONENT, WHEN_FOCUSED, WHEN_IN_FOCUSED_WINDOW

 

Fields inherited from class java.awt.Component
BOTTOM_ALIGNMENT, CENTER_ALIGNMENT, LEFT_ALIGNMENT, RIGHT_ALIGNMENT, TOP_ALIGNMENT

 

Fields inherited from interface java.awt.image.ImageObserver
ABORT, ALLBITS, ERROR, FRAMEBITS, HEIGHT, PROPERTIES, SOMEBITS, WIDTH

 

Constructor Summary
JTextComponent()           Creates a new JTextComponent.

 

Method Summary
void	addCaretListener(CaretListener listener)           Adds a caret listener for notification of any changes to the caret.
void	addInputMethodListener(InputMethodListener l)           Adds the specified input method listener to receive input method events from this component.
static Keymap	addKeymap(String nm, Keymap parent)           Adds a new keymap into the keymap hierarchy.
void	copy()           Transfers the currently selected range in the associated text model to the system clipboard, leaving the contents in the text model.
void	cut()           Transfers the currently selected range in the associated text model to the system clipboard, removing the contents from the model.
protected  void	fireCaretUpdate(CaretEvent e)           Notifies all listeners that have registered interest for notification on this event type.
AccessibleContext	getAccessibleContext()           Gets the AccessibleContext associated with this JTextComponent.
Action[]	getActions()           Fetches the command list for the editor.
Caret	getCaret()           Fetches the caret that allows text-oriented navigation over the view.
Color	getCaretColor()           Fetches the current color used to render the caret.
CaretListener[]	getCaretListeners()           Returns an array of all the caret listeners registered on this text component.
int	getCaretPosition()           Returns the position of the text insertion caret for the text component.
Color	getDisabledTextColor()           Fetches the current color used to render the selected text.
Document	getDocument()           Fetches the model associated with the editor.
boolean	getDragEnabled()           Gets the dragEnabled property.
char	getFocusAccelerator()           Returns the key accelerator that will cause the receiving text component to get the focus.
Highlighter	getHighlighter()           Fetches the object responsible for making highlights.
InputMethodRequests	getInputMethodRequests()           Gets the input method request handler which supports requests from input methods for this component.
Keymap	getKeymap()           Fetches the keymap currently active in this text component.
static Keymap	getKeymap(String nm)           Fetches a named keymap previously added to the document.
Insets	getMargin()           Returns the margin between the text component's border and its text.
NavigationFilter	getNavigationFilter()           Returns the NavigationFilter.
Dimension	getPreferredScrollableViewportSize()           Returns the preferred size of the viewport for a view component.
int	getScrollableBlockIncrement(Rectangle visibleRect, int orientation, int direction)           Components that display logical rows or columns should compute the scroll increment that will completely expose one block of rows or columns, depending on the value of orientation.
boolean	getScrollableTracksViewportHeight()           Returns true if a viewport should always force the height of this Scrollable to match the height of the viewport.
boolean	getScrollableTracksViewportWidth()           Returns true if a viewport should always force the width of this Scrollable to match the width of the viewport.
int	getScrollableUnitIncrement(Rectangle visibleRect, int orientation, int direction)           Components that display logical rows or columns should compute the scroll increment that will completely expose one new row or column, depending on the value of orientation.
String	getSelectedText()           Returns the selected text contained in this TextComponent.
Color	getSelectedTextColor()           Fetches the current color used to render the selected text.
Color	getSelectionColor()           Fetches the current color used to render the selection.
int	getSelectionEnd()           Returns the selected text's end position.
int	getSelectionStart()           Returns the selected text's start position.
String	getText()           Returns the text contained in this TextComponent.
String	getText(int offs, int len)           Fetches a portion of the text represented by the component.
String	getToolTipText(MouseEvent event)           Returns the string to be used as the tooltip for event.
TextUI	getUI()           Fetches the user-interface factory for this text-oriented editor.
boolean	isEditable()           Returns the boolean indicating whether this TextComponent is editable or not.
static void	loadKeymap(Keymap map, JTextComponent.KeyBinding[] bindings, Action[] actions)            Loads a keymap with a bunch of bindings.
Rectangle	modelToView(int pos)           Converts the given location in the model to a place in the view coordinate system.
void	moveCaretPosition(int pos)           Moves the caret to a new position, leaving behind a mark defined by the last time setCaretPosition was called.
protected  String	paramString()           Returns a string representation of this JTextComponent.
void	paste()           Transfers the contents of the system clipboard into the associated text model.
protected  void	processInputMethodEvent(InputMethodEvent e)           Processes input method events occurring on this component by dispatching them to any registered InputMethodListener objects.
void	read(Reader in, Object desc)           Initializes from a stream.
void	removeCaretListener(CaretListener listener)           Removes a caret listener.
static Keymap	removeKeymap(String nm)           Removes a named keymap previously added to the document.
void	removeNotify()           Notifies this component that it no longer has a parent component.
void	replaceSelection(String content)           Replaces the currently selected content with new content represented by the given string.
void	select(int selectionStart, int selectionEnd)           Selects the text between the specified start and end positions.
void	selectAll()           Selects all the text in the TextComponent.
void	setCaret(Caret c)           Sets the caret to be used.
void	setCaretColor(Color c)           Sets the current color used to render the caret.
void	setCaretPosition(int position)           Sets the position of the text insertion caret for the TextComponent.
void	setComponentOrientation(ComponentOrientation o)           Sets the language-sensitive orientation that is to be used to order the elements or text within this component.
void	setDisabledTextColor(Color c)           Sets the current color used to render the disabled text.
void	setDocument(Document doc)           Associates the editor with a text document.
void	setDragEnabled(boolean b)           Sets the dragEnabled property, which must be true to enable automatic drag handling (the first part of drag and drop) on this component.
void	setEditable(boolean b)           Sets the specified boolean to indicate whether or not this TextComponent should be editable.
void	setFocusAccelerator(char aKey)           Sets the key accelerator that will cause the receiving text component to get the focus.
void	setHighlighter(Highlighter h)           Sets the highlighter to be used.
void	setKeymap(Keymap map)           Sets the keymap to use for binding events to actions.
void	setMargin(Insets m)           Sets margin space between the text component's border and its text.
void	setNavigationFilter(NavigationFilter filter)           Sets the NavigationFilter.
void	setSelectedTextColor(Color c)           Sets the current color used to render the selected text.
void	setSelectionColor(Color c)           Sets the current color used to render the selection.
void	setSelectionEnd(int selectionEnd)           Sets the selection end to the specified position.
void	setSelectionStart(int selectionStart)           Sets the selection start to the specified position.
void	setText(String t)           Sets the text of this TextComponent to the specified text.
void	setUI(TextUI ui)           Sets the user-interface factory for this text-oriented editor.
void	updateUI()           Reloads the pluggable UI.
int	viewToModel(Point pt)           Converts the given place in the view coordinate system to the nearest representative location in the model.
void	write(Writer out)           Stores the contents of the model into the given stream.

 

Methods inherited from class javax.swing.JComponent

addAncestorListener, addNotify, addVetoableChangeListener, computeVisibleRect, contains, createToolTip, disable, enable, firePropertyChange, firePropertyChange, firePropertyChange, fireVetoableChange, getActionForKeyStroke, getActionMap, getAlignmentX, getAlignmentY, getAncestorListeners, getAutoscrolls, getBorder, getBounds, getClientProperty, getComponentGraphics, getComponentPopupMenu, getConditionForKeyStroke, getDebugGraphicsOptions, getDefaultLocale, getFontMetrics, getGraphics, getHeight, getInheritsPopupMenu, getInputMap, getInputMap, getInputVerifier, getInsets, getInsets, getListeners, getLocation, getMaximumSize, getMinimumSize, getNextFocusableComponent, getPopupLocation, getPreferredSize, getRegisteredKeyStrokes, getRootPane, getSize, getToolTipLocation, getToolTipText, getTopLevelAncestor, getTransferHandler, getUIClassID, getVerifyInputWhenFocusTarget, getVetoableChangeListeners, getVisibleRect, getWidth, getX, getY, grabFocus, isDoubleBuffered, isLightweightComponent, isManagingFocus, isOpaque, isOptimizedDrawingEnabled, isPaintingTile, isRequestFocusEnabled, isValidateRoot, paint, paintBorder, paintChildren, paintComponent, paintImmediately, paintImmediately, print, printAll, printBorder, printChildren, printComponent, processComponentKeyEvent, processKeyBinding, processKeyEvent, processMouseEvent, processMouseMotionEvent, putClientProperty, registerKeyboardAction, registerKeyboardAction, removeAncestorListener, removeVetoableChangeListener, repaint, repaint, requestDefaultFocus, requestFocus, requestFocus, requestFocusInWindow, requestFocusInWindow, resetKeyboardActions, reshape, revalidate, scrollRectToVisible, setActionMap, setAlignmentX, setAlignmentY, setAutoscrolls, setBackground, setBorder, setComponentPopupMenu, setDebugGraphicsOptions, setDefaultLocale, setDoubleBuffered, setEnabled, setFocusTraversalKeys, setFont, setForeground, setInheritsPopupMenu, setInputMap, setInputVerifier, setMaximumSize, setMinimumSize, setNextFocusableComponent, setOpaque, setPreferredSize, setRequestFocusEnabled, setToolTipText, setTransferHandler, setUI, setVerifyInputWhenFocusTarget, setVisible, unregisterKeyboardAction, update

 

Methods inherited from class java.awt.Container

add, add, add, add, add, addContainerListener, addImpl, addPropertyChangeListener, addPropertyChangeListener, applyComponentOrientation, areFocusTraversalKeysSet, countComponents, deliverEvent, doLayout, findComponentAt, findComponentAt, getComponent, getComponentAt, getComponentAt, getComponentCount, getComponents, getComponentZOrder, getContainerListeners, getFocusTraversalKeys, getFocusTraversalPolicy, getLayout, getMousePosition, insets, invalidate, isAncestorOf, isFocusCycleRoot, isFocusCycleRoot, isFocusTraversalPolicyProvider, isFocusTraversalPolicySet, layout, list, list, locate, minimumSize, paintComponents, preferredSize, printComponents, processContainerEvent, processEvent, remove, remove, removeAll, removeContainerListener, setComponentZOrder, setFocusCycleRoot, setFocusTraversalPolicy, setFocusTraversalPolicyProvider, setLayout, transferFocusBackward, transferFocusDownCycle, validate, validateTree

 

Methods inherited from class java.awt.Component

action, add, addComponentListener, addFocusListener, addHierarchyBoundsListener, addHierarchyListener, addKeyListener, addMouseListener, addMouseMotionListener, addMouseWheelListener, bounds, checkImage, checkImage, coalesceEvents, contains, createImage, createImage, createVolatileImage, createVolatileImage, disableEvents, dispatchEvent, enable, enableEvents, enableInputMethods, firePropertyChange, firePropertyChange, firePropertyChange, firePropertyChange, firePropertyChange, firePropertyChange, getBackground, getBounds, getColorModel, getComponentListeners, getComponentOrientation, getCursor, getDropTarget, getFocusCycleRootAncestor, getFocusListeners, getFocusTraversalKeysEnabled, getFont, getForeground, getGraphicsConfiguration, getHierarchyBoundsListeners, getHierarchyListeners, getIgnoreRepaint, getInputContext, getInputMethodListeners, getKeyListeners, getLocale, getLocation, getLocationOnScreen, getMouseListeners, getMouseMotionListeners, getMousePosition, getMouseWheelListeners, getName, getParent, getPeer, getPropertyChangeListeners, getPropertyChangeListeners, getSize, getToolkit, getTreeLock, gotFocus, handleEvent, hasFocus, hide, imageUpdate, inside, isBackgroundSet, isCursorSet, isDisplayable, isEnabled, isFocusable, isFocusOwner, isFocusTraversable, isFontSet, isForegroundSet, isLightweight, isMaximumSizeSet, isMinimumSizeSet, isPreferredSizeSet, isShowing, isValid, isVisible, keyDown, keyUp, list, list, list, location, lostFocus, mouseDown, mouseDrag, mouseEnter, mouseExit, mouseMove, mouseUp, move, nextFocus, paintAll, postEvent, prepareImage, prepareImage, processComponentEvent, processFocusEvent, processHierarchyBoundsEvent, processHierarchyEvent, processMouseWheelEvent, remove, removeComponentListener, removeFocusListener, removeHierarchyBoundsListener, removeHierarchyListener, removeInputMethodListener, removeKeyListener, removeMouseListener, removeMouseMotionListener, removeMouseWheelListener, removePropertyChangeListener, removePropertyChangeListener, repaint, repaint, repaint, resize, resize, setBounds, setBounds, setCursor, setDropTarget, setFocusable, setFocusTraversalKeysEnabled, setIgnoreRepaint, setLocale, setLocation, setLocation, setName, setSize, setSize, show, show, size, toString, transferFocus, transferFocusUpCycle

 

Methods inherited from class java.lang.Object
clone, equals, finalize, getClass, hashCode, notify, notifyAll, wait, wait, wait

 

Field Detail

FOCUS_ACCELERATOR_KEY

public static final String FOCUS_ACCELERATOR_KEY

The bound property name for the focus accelerator.

See Also:

Constant Field Values

DEFAULT_KEYMAP

public static final String DEFAULT_KEYMAP

The default keymap that will be shared by all JTextComponent instances unless they have had a different keymap set.

See Also:

Constant Field Values

JTextComponent

public JTextComponent()

Creates a new JTextComponent. Listeners for caret events are established, and the pluggable UI installed. The component is marked as editable. No layout manager is used, because layout is managed by the view subsystem of text. The document model is set to null.

getUI

public TextUI getUI()

Fetches the user-interface factory for this text-oriented editor.

Returns:

the factory

setUI

public void setUI(TextUI ui)

Sets the user-interface factory for this text-oriented editor.

Parameters:

ui - the factory

updateUI

public void updateUI()

Reloads the pluggable UI. The key used to fetch the new interface is getUIClassID(). The type of the UI is TextUI. invalidate is called after setting the UI.

Overrides:

updateUI in class JComponent

See Also:

JComponent.setUI(javax.swing.plaf.ComponentUI), UIManager.getLookAndFeel(), UIManager.getUI(javax.swing.JComponent)

addCaretListener

public void addCaretListener(CaretListener listener)

Adds a caret listener for notification of any changes to the caret.

Parameters:

listener - the listener to be added

See Also:

CaretEvent

removeCaretListener

public void removeCaretListener(CaretListener listener)

Removes a caret listener.

Parameters:

listener - the listener to be removed

See Also:

CaretEvent

getCaretListeners

public CaretListener[] getCaretListeners()

Returns an array of all the caret listeners registered on this text component.

Returns:

all of this component's CaretListeners or an empty array if no caret listeners are currently registered

Since:

1.4

See Also:

addCaretListener(javax.swing.event.CaretListener), removeCaretListener(javax.swing.event.CaretListener)

fireCaretUpdate

protected void fireCaretUpdate(CaretEvent e)

Notifies all listeners that have registered interest for notification on this event type. The event instance is lazily created using the parameters passed into the fire method. The listener list is processed in a last-to-first manner.

Parameters:

e - the event

See Also:

EventListenerList

setDocument

public void setDocument(Document doc)

Associates the editor with a text document. The currently registered factory is used to build a view for the document, which gets displayed by the editor after revalidation. A PropertyChange event ("document") is propagated to each listener.

Parameters:

doc - the document to display/edit

See Also:

getDocument()

getDocument

public Document getDocument()

Fetches the model associated with the editor. This is primarily for the UI to get at the minimal amount of state required to be a text editor. Subclasses will return the actual type of the model which will typically be something that extends Document.

Returns:

the model

setComponentOrientation

public void setComponentOrientation(ComponentOrientation o)

Description copied from class: Component

Sets the language-sensitive orientation that is to be used to order the elements or text within this component. Language-sensitive LayoutManager and Component subclasses will use this property to determine how to lay out and draw components.

At construction time, a component's orientation is set to ComponentOrientation.UNKNOWN, indicating that it has not been specified explicitly. The UNKNOWN orientation behaves the same as ComponentOrientation.LEFT_TO_RIGHT.

To set the orientation of a single component, use this method. To set the orientation of an entire component hierarchy, use applyComponentOrientation.

Overrides:

setComponentOrientation in class Component

See Also:

ComponentOrientation

getActions

public Action[] getActions()

Fetches the command list for the editor. This is the list of commands supported by the plugged-in UI augmented by the collection of commands that the editor itself supports. These are useful for binding to events, such as in a keymap.

Returns:

the command list

setMargin

public void setMargin(Insets m)

Sets margin space between the text component's border and its text. The text component's default Border object will use this value to create the proper margin. However, if a non-default border is set on the text component, it is that Border object's responsibility to create the appropriate margin space (else this property will effectively be ignored). This causes a redraw of the component. A PropertyChange event ("margin") is sent to all listeners.

Parameters:

m - the space between the border and the text

getMargin

public Insets getMargin()

Returns the margin between the text component's border and its text.

Returns:

the margin

setNavigationFilter

public void setNavigationFilter(NavigationFilter filter)

Sets the NavigationFilter. NavigationFilter is used by DefaultCaret and the default cursor movement actions as a way to restrict the cursor movement.

Since:

1.4

getNavigationFilter

public NavigationFilter getNavigationFilter()

Returns the NavigationFilter. NavigationFilter is used by DefaultCaret and the default cursor movement actions as a way to restrict the cursor movement. A null return value implies the cursor movement and selection should not be restricted.

Returns:

the NavigationFilter

Since:

1.4

getCaret

public Caret getCaret()

Fetches the caret that allows text-oriented navigation over the view.

Returns:

the caret

setCaret

public void setCaret(Caret c)

Sets the caret to be used. By default this will be set by the UI that gets installed. This can be changed to a custom caret if desired. Setting the caret results in a PropertyChange event ("caret") being fired.

Parameters:

c - the caret

See Also:

getCaret()

getHighlighter

public Highlighter getHighlighter()

Fetches the object responsible for making highlights.

Returns:

the highlighter

setHighlighter

public void setHighlighter(Highlighter h)

Sets the highlighter to be used. By default this will be set by the UI that gets installed. This can be changed to a custom highlighter if desired. The highlighter can be set to null to disable it. A PropertyChange event ("highlighter") is fired when a new highlighter is installed.

Parameters:

h - the highlighter

See Also:

getHighlighter()

setKeymap

public void setKeymap(Keymap map)

Sets the keymap to use for binding events to actions. Setting to null effectively disables keyboard input. A PropertyChange event ("keymap") is fired when a new keymap is installed.

Parameters:

map - the keymap

See Also:

getKeymap()

setDragEnabled

public void setDragEnabled(boolean b)

Sets the dragEnabled property, which must be true to enable automatic drag handling (the first part of drag and drop) on this component. The transferHandler property needs to be set to a non-null value for the drag to do anything. The default value of the dragEnabled property is false.

When automatic drag handling is enabled, most look and feels begin a drag-and-drop operation whenever the user presses the mouse button over a selection and then moves the mouse a few pixels. Setting this property to true can therefore have a subtle effect on how selections behave.

Some look and feels might not support automatic drag and drop; they will ignore this property. You can work around such look and feels by modifying the component to directly call the exportAsDrag method of a TransferHandler.

Parameters:

b - the value to set the dragEnabled property to

Throws:

HeadlessException - if b is true and GraphicsEnvironment.isHeadless() returns true

Since:

1.4

See Also:

GraphicsEnvironment.isHeadless(), getDragEnabled(), JComponent.setTransferHandler(javax.swing.TransferHandler), TransferHandler

getDragEnabled

public boolean getDragEnabled()

Gets the dragEnabled property.

Returns:

the value of the dragEnabled property

Since:

1.4

See Also:

setDragEnabled(boolean)

getKeymap

public Keymap getKeymap()

Fetches the keymap currently active in this text component.

Returns:

the keymap

addKeymap

public static Keymap addKeymap(String nm,
                               Keymap parent)

Adds a new keymap into the keymap hierarchy. Keymap bindings resolve from bottom up so an attribute specified in a child will override an attribute specified in the parent.

Parameters:

nm - the name of the keymap (must be unique within the collection of named keymaps in the document); the name may be null if the keymap is unnamed, but the caller is responsible for managing the reference returned as an unnamed keymap can't be fetched by name

parent - the parent keymap; this may be null if unspecified bindings need not be resolved in some other keymap

Returns:

the keymap

removeKeymap

public static Keymap removeKeymap(String nm)

Removes a named keymap previously added to the document. Keymaps with null names may not be removed in this way.

Parameters:

nm - the name of the keymap to remove

Returns:

the keymap that was removed

getKeymap

public static Keymap getKeymap(String nm)

Fetches a named keymap previously added to the document. This does not work with null-named keymaps.

Parameters:

nm - the name of the keymap

Returns:

the keymap

loadKeymap

public static void loadKeymap(Keymap map,
                              JTextComponent.KeyBinding[] bindings,
                              Action[] actions)

Loads a keymap with a bunch of bindings. This can be used to take a static table of definitions and load them into some keymap. The following example illustrates an example of binding some keys to the cut, copy, and paste actions associated with a JTextComponent. A code fragment to accomplish this might look as follows:

   static final JTextComponent.KeyBinding[] defaultBindings = {
     new JTextComponent.KeyBinding(
       KeyStroke.getKeyStroke(KeyEvent.VK_C, InputEvent.CTRL_MASK),
       DefaultEditorKit.copyAction),
     new JTextComponent.KeyBinding(
       KeyStroke.getKeyStroke(KeyEvent.VK_V, InputEvent.CTRL_MASK),
       DefaultEditorKit.pasteAction),
     new JTextComponent.KeyBinding(
       KeyStroke.getKeyStroke(KeyEvent.VK_X, InputEvent.CTRL_MASK),
       DefaultEditorKit.cutAction),
   };

   JTextComponent c = new JTextPane();
   Keymap k = c.getKeymap();
   JTextComponent.loadKeymap(k, defaultBindings, c.getActions());
 
 

The sets of bindings and actions may be empty but must be non-null.

Parameters:

map - the keymap

bindings - the bindings

actions - the set of actions

getCaretColor

public Color getCaretColor()

Fetches the current color used to render the caret.

Returns:

the color

setCaretColor

public void setCaretColor(Color c)

Sets the current color used to render the caret. Setting to null effectively restores the default color. Setting the color results in a PropertyChange event ("caretColor") being fired.

Parameters:

c - the color

See Also:

getCaretColor()

getSelectionColor

public Color getSelectionColor()

Fetches the current color used to render the selection.

Returns:

the color

setSelectionColor

public void setSelectionColor(Color c)

Sets the current color used to render the selection. Setting the color to null is the same as setting Color.white. Setting the color results in a PropertyChange event ("selectionColor").

Parameters:

c - the color

See Also:

getSelectionColor()

getSelectedTextColor

public Color getSelectedTextColor()

Fetches the current color used to render the selected text.

Returns:

the color

setSelectedTextColor

public void setSelectedTextColor(Color c)

Sets the current color used to render the selected text. Setting the color to null is the same as Color.black. Setting the color results in a PropertyChange event ("selectedTextColor") being fired.

Parameters:

c - the color

See Also:

getSelectedTextColor()

getDisabledTextColor

public Color getDisabledTextColor()

Fetches the current color used to render the selected text.

Returns:

the color

setDisabledTextColor

public void setDisabledTextColor(Color c)

Sets the current color used to render the disabled text. Setting the color fires off a PropertyChange event ("disabledTextColor").

Parameters:

c - the color

See Also:

getDisabledTextColor()

replaceSelection

public void replaceSelection(String content)

Replaces the currently selected content with new content represented by the given string. If there is no selection this amounts to an insert of the given text. If there is no replacement text this amounts to a removal of the current selection.

This is the method that is used by the default implementation of the action for inserting content that gets bound to the keymap actions.

This method is thread safe, although most Swing methods are not. Please see Threads and Swing for more information.

Parameters:

content - the content to replace the selection with

getText

public String getText(int offs,
                      int len)
               throws BadLocationException

Fetches a portion of the text represented by the component. Returns an empty string if length is 0.

Parameters:

offs - the offset >= 0

len - the length >= 0

Returns:

the text

Throws:

BadLocationException - if the offset or length are invalid

modelToView

public Rectangle modelToView(int pos)
                      throws BadLocationException

Converts the given location in the model to a place in the view coordinate system. The component must have a positive size for this translation to be computed (i.e. layout cannot be computed until the component has been sized). The component does not have to be visible or painted.

Parameters:

pos - the position >= 0

Returns:

the coordinates as a rectangle, with (r.x, r.y) as the location in the coordinate system, or null if the component does not yet have a positive size.

Throws:

BadLocationException - if the given position does not represent a valid location in the associated document

See Also:

TextUI.modelToView(javax.swing.text.JTextComponent, int)

viewToModel

public int viewToModel(Point pt)

Converts the given place in the view coordinate system to the nearest representative location in the model. The component must have a positive size for this translation to be computed (i.e. layout cannot be computed until the component has been sized). The component does not have to be visible or painted.

Parameters:

pt - the location in the view to translate

Returns:

the offset >= 0 from the start of the document, or -1 if the component does not yet have a positive size.

See Also:

TextUI.viewToModel(javax.swing.text.JTextComponent, java.awt.Point)

cut

public void cut()

Transfers the currently selected range in the associated text model to the system clipboard, removing the contents from the model. The current selection is reset. Does nothing for null selections.

See Also:

Toolkit.getSystemClipboard(), Clipboard

copy

public void copy()

Transfers the currently selected range in the associated text model to the system clipboard, leaving the contents in the text model. The current selection remains intact. Does nothing for null selections.

See Also:

Toolkit.getSystemClipboard(), Clipboard

paste

public void paste()

Transfers the contents of the system clipboard into the associated text model. If there is a selection in the associated view, it is replaced with the contents of the clipboard. If there is no selection, the clipboard contents are inserted in front of the current insert position in the associated view. If the clipboard is empty, does nothing.

See Also:

replaceSelection(java.lang.String), Toolkit.getSystemClipboard(), Clipboard

moveCaretPosition

public void moveCaretPosition(int pos)

Moves the caret to a new position, leaving behind a mark defined by the last time setCaretPosition was called. This forms a selection. If the document is null, does nothing. The position must be between 0 and the length of the component's text or else an exception is thrown.

Parameters:

pos - the position

Throws:

IllegalArgumentException - if the value supplied for position is less than zero or greater than the component's text length

See Also:

setCaretPosition(int)

setFocusAccelerator

public void setFocusAccelerator(char aKey)

Sets the key accelerator that will cause the receiving text component to get the focus. The accelerator will be the key combination of the alt key and the character given (converted to upper case). By default, there is no focus accelerator key. Any previous key accelerator setting will be superseded. A '\0' key setting will be registered, and has the effect of turning off the focus accelerator. When the new key is set, a PropertyChange event (FOCUS_ACCELERATOR_KEY) will be fired.

Parameters:

aKey - the key

See Also:

getFocusAccelerator()

getFocusAccelerator

public char getFocusAccelerator()

Returns the key accelerator that will cause the receiving text component to get the focus. Return '\0' if no focus accelerator has been set.

Returns:

the key

read

public void read(Reader in,
                 Object desc)
          throws IOException

Initializes from a stream. This creates a model of the type appropriate for the component and initializes the model from the stream. By default this will load the model as plain text. Previous contents of the model are discarded.

Parameters:

in - the stream to read from

desc - an object describing the stream; this might be a string, a File, a URL, etc. Some kinds of documents (such as html for example) might be able to make use of this information; if non-null, it is added as a property of the document

Throws:

IOException - as thrown by the stream being used to initialize

See Also:

EditorKit.createDefaultDocument(), setDocument(javax.swing.text.Document), PlainDocument

write

public void write(Writer out)
           throws IOException

Stores the contents of the model into the given stream. By default this will store the model as plain text.

Parameters:

out - the output stream

Throws:

IOException - on any I/O error

removeNotify

public void removeNotify()

Description copied from class: JComponent

Notifies this component that it no longer has a parent component. When this method is invoked, any KeyboardActions set up in the the chain of parent components are removed.

Overrides:

removeNotify in class JComponent

See Also:

JComponent.registerKeyboardAction(java.awt.event.ActionListener, java.lang.String, javax.swing.KeyStroke, int)

setCaretPosition

public void setCaretPosition(int position)

Sets the position of the text insertion caret for the TextComponent. Note that the caret tracks change, so this may move if the underlying text of the component is changed. If the document is null, does nothing. The position must be between 0 and the length of the component's text or else an exception is thrown.

Parameters:

position - the position

Throws:

IllegalArgumentException - if the value supplied for position is less than zero or greater than the component's text length

getCaretPosition

public int getCaretPosition()

Returns the position of the text insertion caret for the text component.

Returns:

the position of the text insertion caret for the text component >= 0

setText

public void setText(String t)

Sets the text of this TextComponent to the specified text. If the text is null or empty, has the effect of simply deleting the old text. When text has been inserted, the resulting caret location is determined by the implementation of the caret class.

This method is thread safe, although most Swing methods are not. Please see Threads and Swing for more information. Note that text is not a bound property, so no PropertyChangeEvent is fired when it changes. To listen for changes to the text, use DocumentListener.

Parameters:

t - the new text to be set

See Also:

getText(int, int), DefaultCaret

getText

public String getText()

Returns the text contained in this TextComponent. If the underlying document is null, will give a NullPointerException. Note that text is not a bound property, so no PropertyChangeEvent is fired when it changes. To listen for changes to the text, use DocumentListener.

Returns:

the text

Throws:

NullPointerException - if the document is null

See Also:

setText(java.lang.String)

getSelectedText

public String getSelectedText()

Returns the selected text contained in this TextComponent. If the selection is null or the document empty, returns null.

Returns:

the text

Throws:

IllegalArgumentException - if the selection doesn't have a valid mapping into the document for some reason

See Also:

setText(java.lang.String)

isEditable

public boolean isEditable()

Returns the boolean indicating whether this TextComponent is editable or not.

Returns:

the boolean value

See Also:

setEditable(boolean)

setEditable

public void setEditable(boolean b)

Sets the specified boolean to indicate whether or not this TextComponent should be editable. A PropertyChange event ("editable") is fired when the state is changed.

Parameters:

b - the boolean to be set

See Also:

isEditable()

getSelectionStart

public int getSelectionStart()

Returns the selected text's start position. Return 0 for an empty document, or the value of dot if no selection.

Returns:

the start position >= 0

setSelectionStart

public void setSelectionStart(int selectionStart)

Sets the selection start to the specified position. The new starting point is constrained to be before or at the current selection end.

This is available for backward compatibility to code that called this method on java.awt.TextComponent. This is implemented to forward to the Caret implementation which is where the actual selection is maintained.

Parameters:

selectionStart - the start position of the text >= 0

getSelectionEnd

public int getSelectionEnd()

Returns the selected text's end position. Return 0 if the document is empty, or the value of dot if there is no selection.

Returns:

the end position >= 0

setSelectionEnd

public void setSelectionEnd(int selectionEnd)

Sets the selection end to the specified position. The new end point is constrained to be at or after the current selection start.

This is available for backward compatibility to code that called this method on java.awt.TextComponent. This is implemented to forward to the Caret implementation which is where the actual selection is maintained.

Parameters:

selectionEnd - the end position of the text >= 0

select

public void select(int selectionStart,
                   int selectionEnd)

Selects the text between the specified start and end positions.

This method sets the start and end positions of the selected text, enforcing the restriction that the start position must be greater than or equal to zero. The end position must be greater than or equal to the start position, and less than or equal to the length of the text component's text.

If the caller supplies values that are inconsistent or out of bounds, the method enforces these constraints silently, and without failure. Specifically, if the start position or end position is greater than the length of the text, it is reset to equal the text length. If the start position is less than zero, it is reset to zero, and if the end position is less than the start position, it is reset to the start position.

This call is provided for backward compatibility. It is routed to a call to setCaretPosition followed by a call to moveCaretPosition. The preferred way to manage selection is by calling those methods directly.

Parameters:

selectionStart - the start position of the text

selectionEnd - the end position of the text

See Also:

setCaretPosition(int), moveCaretPosition(int)

selectAll

public void selectAll()

Selects all the text in the TextComponent. Does nothing on a null or empty document.

getToolTipText

public String getToolTipText(MouseEvent event)

Returns the string to be used as the tooltip for event. This will return one of:

1. If setToolTipText has been invoked with a non-null value, it will be returned, otherwise
2. The value from invoking getToolTipText on the UI will be returned.

By default JTextComponent does not register itself with the ToolTipManager. This means that tooltips will NOT be shown from the TextUI unless registerComponent has been invoked on the ToolTipManager.

Overrides:

getToolTipText in class JComponent

Parameters:

event - the event in question

Returns:

the string to be used as the tooltip for event

See Also:

JComponent.setToolTipText(java.lang.String), TextUI.getToolTipText(javax.swing.text.JTextComponent, java.awt.Point), ToolTipManager.registerComponent(javax.swing.JComponent)

getPreferredScrollableViewportSize

public Dimension getPreferredScrollableViewportSize()

Returns the preferred size of the viewport for a view component. This is implemented to do the default behavior of returning the preferred size of the component.

Specified by:

getPreferredScrollableViewportSize in interface Scrollable

Returns:

the preferredSize of a JViewport whose view is this Scrollable

See Also:

JComponent.getPreferredSize()

getScrollableUnitIncrement

public int getScrollableUnitIncrement(Rectangle visibleRect,
                                      int orientation,
                                      int direction)

Components that display logical rows or columns should compute the scroll increment that will completely expose one new row or column, depending on the value of orientation. Ideally, components should handle a partially exposed row or column by returning the distance required to completely expose the item.

The default implementation of this is to simply return 10% of the visible area. Subclasses are likely to be able to provide a much more reasonable value.

Specified by:

getScrollableUnitIncrement in interface Scrollable

Parameters:

visibleRect - the view area visible within the viewport

orientation - either SwingConstants.VERTICAL or SwingConstants.HORIZONTAL

direction - less than zero to scroll up/left, greater than zero for down/right

Returns:

the "unit" increment for scrolling in the specified direction

Throws:

IllegalArgumentException - for an invalid orientation

See Also:

JScrollBar.setUnitIncrement(int)

getScrollableBlockIncrement

public int getScrollableBlockIncrement(Rectangle visibleRect,
                                       int orientation,
                                       int direction)

Components that display logical rows or columns should compute the scroll increment that will completely expose one block of rows or columns, depending on the value of orientation.

The default implementation of this is to simply return the visible area. Subclasses will likely be able to provide a much more reasonable value.

Specified by:

getScrollableBlockIncrement in interface Scrollable

Parameters:

visibleRect - the view area visible within the viewport

orientation - either SwingConstants.VERTICAL or SwingConstants.HORIZONTAL

direction - less than zero to scroll up/left, greater than zero for down/right

Returns:

the "block" increment for scrolling in the specified direction

Throws:

IllegalArgumentException - for an invalid orientation

See Also:

JScrollBar.setBlockIncrement(int)

getScrollableTracksViewportWidth

public boolean getScrollableTracksViewportWidth()

Returns true if a viewport should always force the width of this Scrollable to match the width of the viewport. For example a normal text view that supported line wrapping would return true here, since it would be undesirable for wrapped lines to disappear beyond the right edge of the viewport. Note that returning true for a Scrollable whose ancestor is a JScrollPane effectively disables horizontal scrolling.

Scrolling containers, like JViewport, will use this method each time they are validated.

Specified by:

getScrollableTracksViewportWidth in interface Scrollable

Returns:

true if a viewport should force the Scrollables width to match its own

getScrollableTracksViewportHeight

public boolean getScrollableTracksViewportHeight()

Returns true if a viewport should always force the height of this Scrollable to match the height of the viewport. For example a columnar text view that flowed text in left to right columns could effectively disable vertical scrolling by returning true here.

Scrolling containers, like JViewport, will use this method each time they are validated.

Specified by:

getScrollableTracksViewportHeight in interface Scrollable

Returns:

true if a viewport should force the Scrollables height to match its own

getAccessibleContext

public AccessibleContext getAccessibleContext()

Gets the AccessibleContext associated with this JTextComponent. For text components, the AccessibleContext takes the form of an AccessibleJTextComponent. A new AccessibleJTextComponent instance is created if necessary.

Specified by:

getAccessibleContext in interface Accessible

Overrides:

getAccessibleContext in class JComponent

Returns:

an AccessibleJTextComponent that serves as the AccessibleContext of this JTextComponent

paramString

protected String paramString()

Returns a string representation of this JTextComponent. This method is intended to be used only for debugging purposes, and the content and format of the returned string may vary between implementations. The returned string may be empty but may not be null.

Overriding paramString to provide information about the specific new aspects of the JFC components.

Overrides:

paramString in class JComponent

Returns:

a string representation of this JTextComponent

processInputMethodEvent

protected void processInputMethodEvent(InputMethodEvent e)

Description copied from class: Component

Processes input method events occurring on this component by dispatching them to any registered InputMethodListener objects.

This method is not called unless input method events are enabled for this component. Input method events are enabled when one of the following occurs:

• An InputMethodListener object is registered via addInputMethodListener.
• Input method events are enabled via enableEvents.

Note that if the event parameter is null the behavior is unspecified and may result in an exception.

Overrides:

processInputMethodEvent in class Component

Parameters:

e - the input method event

See Also:

InputMethodEvent, InputMethodListener, Component.addInputMethodListener(java.awt.event.InputMethodListener), Component.enableEvents(long)

getInputMethodRequests

public InputMethodRequests getInputMethodRequests()

Description copied from class: Component

Gets the input method request handler which supports requests from input methods for this component. A component that supports on-the-spot text input must override this method to return an InputMethodRequests instance. At the same time, it also has to handle input method events.

Overrides:

getInputMethodRequests in class Component

Returns:

the input method request handler for this component, null by default

See Also:

Component.addInputMethodListener(java.awt.event.InputMethodListener)

addInputMethodListener

public void addInputMethodListener(InputMethodListener l)

Description copied from class: Component

Adds the specified input method listener to receive input method events from this component. A component will only receive input method events from input methods if it also overrides getInputMethodRequests to return an InputMethodRequests instance. If listener l is null, no exception is thrown and no action is performed.

Overrides:

addInputMethodListener in class Component

Parameters:

l - the input method listener

See Also:

InputMethodEvent, InputMethodListener, Component.removeInputMethodListener(java.awt.event.InputMethodListener), Component.getInputMethodListeners(), Component.getInputMethodRequests()